A. B.
Mechanical series: AB 300-
4 clamp type: vertical, pneumatic clamp size: 2 tons injection device: vertical, pneumatic reciprocating screw injection capacity: 0.
25 oz application: laboratory testing, jewelry manufacturingPedal operation.
Injection, injection and clamping with adjustable electronic timer.
Absolute Haitian company
Series: Haitian Saturn HTFW clamp type: horizontal, hydraulic toggle clamp-
Size range: 65 to 4000 ton injection unit: Hydraulic, reciprocating screw injection capability: 4 to 1110 Oz application: General standard features: 5-
Point toggle clip, water-
Feedback throat cooled by Keba controller, 10. 4-in.
Color LCD, robot interface, self
Diagnosis of closure
Loop control of injection speed, holding pressure, screw speed, back pressure.
Real ejection, air strike and cordon-the-fly.
Series: Haitian Mars clamp type: horizontal, toggle, servo electric pump drive clamp-
Size range: 65 to 2400 ton injection unit: Hydraulic, reciprocating screw injection capability: 1 to 800 Oz series: Haitian/zha Phil Venus clamp type: horizontal, hydraulic
Size range: 40 tons to 450 tons injection device: electric injection capacity: 0.
Applications from 5 to 30 ounces: highvolume/high-Quick injection.
Option: Multi-Technology Vertical fixture (35 to 500 tons)ARBURG, INC.
Series: full circle A clamp type: horizontal, electric toggle clamp size range: 55 to 220 tons injection device: electric, reciprocating screw injection capacity: 0. 34 to 15.
3 ounces for 29 copper.
/Sec application: high
Technical standard features: electric screw drive; Selogica 32-
Bit multi-processor control with graphic sequence programmingmodulardesign.
Option: electric drive on the movement of the ejector, core pull and/or nozzle.
Cavity pressure transfer, heat sleeve, injection molding, LSR and rubber; gasassist; multi-component.
Series: Full Circle C clamp type: horizontal, full hydraulic clamp-
Size range: 33 to 240 tons injection device: Hydraulic, reciprocating screw injection capacity: 1 to 29.
1 ounce for 70. 39 cu in.
/Sec application: standard features of small to large parts: rotating barrels; Selogica 32-
Bit multi-processor control with graphical sequence programming, integrated robotics and peripheral programmable.
Option: Accumulator-
Auxiliary injection; Vario off-
Central injection;
Vertical partingline injection; cavity-
Transmission of pressure;
Hot sleeve, PET, MIM, LSR gas assist and multi
Component configuration.
Electric drive of plastic. Multi-
Component, overall selector.
Series: Gold Edition of all talents (Horizontal)
Clamp type: horizontal, full hydraulic clamp-
Size range: 44 to 510 tons injection device: Hydraulic, reciprocating screw injection capacity: 0. 7 to 45.
4 oz standard function: servo
Hydraulic system with double adjustment
Fast pumping technology
Switch valve technology and high wear
Resistance cylinder;
Selogica control system, input data through touch screen, graphics
Sequence programming and data storage based on compact flash cards.
Series: Gold Edition of all talents (Vertical)
Clamp type: vertical, full hydraulic clamp-
Size range: 88 & 110 tons injection device: Hydraulic, reciprocating screw injection capacity: 1 to 6.
1 ounce standard features: turntable diameter. 47. 2 in. ; servo-
Adjustable hydraulic system, double
Pump technology, fast
Switch valve technology and high wear
Barrel-resistant;
Selogica control system, input data through touch screen, graphics
Sequence programming and data storage based on compact flash cards.
Series: Full Circle K clamp type: horizontal, hydraulic toggle clamp-
Size range: 28 to 38 tons injection device: Hydraulic, reciprocating screw injection capacity: 1 to 2.
3 ounces for 4 ounces. 9 cu in.
/Sec application: small and medium-sized-size parts.
Standard features: modular structure, triple screw diameter, injection device that can be converted to vertical partingline position;
Selogicacon with graphics sequence programming and integration of robots and peripherals-
Programmable device.
Optional: stand fixture or convertible (
Horizontal/vertical)clamp.
Cavity pressure transfer, heat sleeve, injection molding, LSR and rubber.
Series: full round s clamp type: horizontal, full hydraulic clamp-
Size range: 14 tons to 620 tons injection device: Hydraulic, reciprocating screw injection capacity: 10. 3 to 65.
6 ounces at a rate of 119. 8 cu in.
/Sec application: Micro-styling of large parts.
Standard features: modular structure, closed
Loop adjustment of shooting unit;
32-graphics programmable
Multi-process control;
Rotate the barrel.
Option: Accumulator-
Auxiliary injection; cavity-
Transmission of pressure; Vario off-
Central injection; convertible (
Horizontal/vertical)
Clampand injection molding machine;
Various control expansion packages;
Electric drive of plastic.
Heat sleeve, LSR, MIM, gas-
Assist and configure. Multi-component.
Series: Full Circle T-clamp type: vertical, full hydraulic clamp-
Size range: 44 to 220 tons injection device: Hydraulic, reciprocating screw injection capacity: 0. 47 to 15.
3 oz application: standard features of insert molding: turntable (two-or three-station, diam. 35 to59 in. ), four-
Convertible hardcore clip (
Horizontal/vertical)injectionunit; Selogica 32-
Bit multi-processor control for graphic programmingmodular design.
Option: Accumulator-
Auxiliary injection;
Hot sleeve, rubber, LIM.
Plastic, multi-electric drivecomponent.
Series: Full Circle U-clamp type: horizontal, full hydraulic clip-size range: 13.
Injection Device from 5 to 176 tons: Hydraulic, reciprocating screw, closed-
Injection ring speed regulation amount: 0. 34 to 15.
3 ounces for 49. 7 cu in.
Standard features: modular structure, the injection unit can be converted to vertical parting
Selogica 32-line location
Bit multi-processor control with graphical sequence programming and integrated robotics and peripherals-
Programmable device.
Option: Accumulator-
Auxiliary injection, vertical clip or convertible (
Horizontal/vertical)clamp.
Injection of parting line, heat sleeve, rubber, LIM.
Plastic, multi-electric drive
Component, overall selector.
Series: all-around V (
175 V, 275 V and 375 V)
Clamp type: vertical, full hydraulic clamp-
Size range: 14 tons, 28 tons, 55 tons injection device: Hydraulic and reciprocating screw injection capacity: 0. 34 to 9.
Standard features: modular structure, injection unit conversion, mold separation-
Selogica 32-line location
Bit multi-processor control with graphical sequence programming.
Options: cavity pressure transfer, heat sleeve, LSR and MIM, rotary table or shuttle.
Car manufacturersDIV.
Mira clone.
Series: Evolution EV clamp type: vertical, hydraulic type Cframe Clamp-
Size range: 30 ~ Injection device of 280 tons: Hydraulic, reciprocating screw injection capacity: 0.
Applications from 73 to 34 ounces: standard functions for Insert molding: rotating, shuttling and fixing tables;
No iron clip; Vertex ST PC-based, closed-
Loop controller with 104-in.
Color LCD for 40 moldsups, SPC, user-
Configurable fastSet screens.
Option: vertex NT controller (Windows NT)
Built-in Internet browser.
Boy Machine Company
Series: Dipronic 22D and 35D clamp type: horizontal, vertical;
Hydraulic two clamps-size range: 24. 2 & 38.
6 tons of injection device: Hydraulic, reciprocating screw injection capacity: 0. 2 to 2.
7 oz application: Universal.
Standard features: cantilever clamp end with variable pitch, LED display
Volume Pump, Dipronic control with digital control pressure, speed and timer.
There are two posts in 22D, and four posts in 35D.
Options: LSR, PVC, hot solid, elastic, insert, PIM, Micro
Mold and ceramic mold plate.
Series: Procan MD model fixture type from 12 m to 90 m: horizontal, vertical;
Hydraulic two clamps-size range: 14.
2 ~ 99 tons of injection device: Hydraulic, reciprocating screw injection capacity: 0. 16 to 8.
33 oz application: universal standard function: cantilever clamping end, Procan closed-
Loop Control with digital input and output, LCD display, variables-volumepump.
Options: LSR, PVC, hot solid, elastic, insert, PIM, Micro
Molding and ceramic forming versions;
Feature extension package;
Interface/floppy package.
Series: Procan CT models 12A to 90A clamp type: horizontal, vertical; hydraulic two-platen Clamp-size range: 14.
2 ~ 99 tons of injection device: Hydraulic, reciprocating screw injection capacity: 0. 16 oz. to 8. 33 oz.
Application: universal standard features: cantilever clamping end, variable-
Displacement pump, Procan off-loop, 32-
Color touch screen, four programmable inputs and outputs and 128-
MB Flash Drive for data storage.
Options: LSR, PVC, hot solid, elastic, insert, PIM, Micro
Mold and ceramic mold plate.
Series: Procan MD 22MVV, 22MVH, 35MVV, 55MVV clamp type: vertical, hydraulic dual-platen Clamp-size range: 24. 2 tons, 38.
6 tons of injection device: Hydraulic, vertical or horizontal reciprocating screw injection capacity: 0. 2 to 2.
7 oz application: standard function for Insert molding: Procan closure-
Loop Control with digital input and output, LCD display, variables-volume pump.
Options: LSR, PVC, hot solid, elastic, PIM, Micro
Mold and ceramic mold plate.
Feature extension package, interface/FloppyDrive package.
Series: Procan CT 22AVV, 22AVH, 35AVV, 55AVV clamp type: vertical, hydraulic dual-platen Clamp-size range: 24. 2 tons, 38.
6 tons of injection device: Hydraulic, vertical or horizontal reciprocating screw injection capacity: 0. 2 to 2.
7 oz application: Insert molding standard function: Variable-volume pump; Procan closed-loop, 32-
Bit control with four programmable inputs and outputs, a color touch screen and 128-
MB Flash Drive for data storage;
Four programmable inputs and outputs.
Options: LSR, PVC, hot solid, elastic, PIM, Micro
Mold and ceramic mold plate.
Chen Hesong machinery (CANADA)CO.
Chen hsong group member series: Jetmaster MKIII clamp type: horizontal, hydraulic toggle clamp-
Size range: 132 to 396 tons injection device: Hydraulic, reciprocating screw injection capacity: 42. 3 to 172.
8 oz standard function: Jetmaster CPC-II or CH-3.
5 PC controller for memory storage of 150 mold group-ups. Options: Shut-
Accumulator nozzle-
Auxiliary injection, bottle stopper, unscrew mechanism, closed-
Closed loop servo control.
Series: Jetmaster MKIV clamp type: horizontal, hydraulic toggle clamp-
Size range: 86 to 237 tons injection device: Hydraulic, reciprocating screw injection capacity: 3. 6 to 21.
7 oz, 38,600 psi application pressure: High-
Precision and thickness
Standard features of wall forming: Five-
Click to switch and extend the opening trip by 11. 8 to 21. 7 in.
Series: Jetmaster (two-platen)
Clamp type: horizontal, two-in-one hydraulic machineryplaten Clamp-
Size range: 550 to 3200 ton injection unit: Hydraulic, reciprocating screw injection capability: 75 to 736 Oz application: standard function for large parts: dual hydraulic jet cylinder, optical encoder for screw position3.
5 PC controller with LCD, storage for150 mold-ups, cycle-
Automatic count settingsstop.
Option: Accumulator-
Auxiliary injection.
Series: Jetmaster (three-platen)
Fixture type: Level, hydraulic machinery three-platen Clamp-
Size range: 550 to 3100 tons injection device: Hydraulic, reciprocating screw injection capacity: 71. 5 to 656.
Standard features: double hydraulic injection cylinder, optical encoder for screw position, CH-3.
5 PC controller with LCD, storage for150 mold-ups, cycle-
Automatic count settingsstop.
Option: Accumulator-
Auxiliary injection.
Series: Micro-spray clamp type: horizontal, full hydraulic clamp size: 127
6 tons of injection device: Hydraulic, reciprocating screw injection capacity: 1 to 1.
Standard features: dual injection hydraulic cylinder, MJ20D-
Ccontroller with LCD, can store 150 moldsups, self-diagnostics.
Option: Robot Interface, hydraulic oil-
Temperature control, off-Open your mouth, double
Stage back pressure control, screw down the mechanism, pull the core. Series: Chen-
PET clamp type: horizontal, hydraulic toggle clamp-
Size range: 132 to 396 tons injection device: Hydraulic, reciprocating screw injection capacity: 42. 3 to 172.
8 oz application: PET premix (
8 to 48 cavities)
Standard features: Machine integrated control, thermal
Molds, robots and conveyors. Barber-
Colman controller, off-
Closed-loop injection process control, off-off nozzle.
Series: Supermaster TP (two-platen)
Clamp type: horizontal hydraulic toggle clamp-
Size range: 605 to 3520 tons injection unit: Hydraulic, reciprocating screw injection capacity: 76 to 736 Oz application: standard function for medium and large parts: CDC-
2000 controller and 10. 4 in. color monitor.
Series: Supermaster double toggle clamp type: horizontal, hydraulic, double toggle clamp-
Size range: 55 to 495 tons injection device: Hydraulic, reciprocating screw injection capacity: 2 to 66.
6 oz application: standard functions for general and professional molding: CDC-
Controller 2000,5-
The point double trigger mechanism in the clamping device, PED barrel temperature control.
The automatic cleaning function, material and color change are simplified. Integratedlow-
The pressure system is part of the hydraulic circuit to ensure the complete safety of the mold.
The design of the double cylinder injection device reduces the injection distance.
Series: Supermaster TS clamp type: horizontal, hydraulic, toggle clamp-
Size range: 33 to 495 tons injection device: Hydraulic, reciprocating screw injection capability: 50 to 425 Oz application: General standard features: high
BOSCH\'s own responsive proportional valve
CDC-lubrication clamping device, bearing guide rail for mobile platform without lubrication2000 PC-
Based on the controller.
Series: Super Master HC (
Hydraulic clamping)
Clamp type: horizontal full hydraulic clamp-
Size range: 33 to 495 tons injection device: Hydraulic, reciprocating screw injection capacity: 2 to 53 ounces
Standard function: direct hydraulic clamping system.
Safety control for mechanical, electrical and optional equipment. High-
Able to provide torque motors of various settings for screw rotation. Low-
The pressure protection system can prevent mold damage.
Series: Snpermaster heavy duty double toggle clamp type: horizontal, hydraulic, double toggle clamp-
Size range: 660 to 1485 tons injection device: Hydraulic, reciprocating screw injection capacity: 74. 8 to 181.
8 oz application: General standard function: five-point double-toggle mechanism to provide pressure retention for balancing double hydraulic cylinders
The mold with the regeneration circuit is closed, eliminating noise, shortening the cycle time and saving energy.
Series: MII Super Master (two-platen)
Fixture type: horizontal, Hydraulic Mechanical fixture-
Size range: 605,770 tons injection device: Hydraulic, reciprocating screw series: Jetmaster ECO clamp type: electric toggle clamp-
Size range: 55 to 140 tons injection device: Electric-
Driving, reciprocating screw injection capacity: 1. 6 to 11.
3 oz application: Universal-
Standard features: electric servo motor and ball screw drive injection, plasticization, clamping and top-out.
R3000 controller, leak-
Closed free nozzle
Loop pressure control for injection and plastic enhancement.
Cincinnati MILACRON injection molding machine Series: Magna Tg clamp type: horizontal hydraulic toggle clamp-
Size range: 170 to 450 tons injection device: Hydraulic, reciprocating screw injection capacity: 3.
Application from 8 to 54 ounces: high
Standard features of output molding: proportional hydraulic, accurate positioning to0. 001 in. , closed-
Hydraulic core pulling, loop process control, three-stageair eject.
Options: thermostat configuration, fixture-
Hillburn tonnage reading-
Dual Programmable kernel output detection.
Series: Maxima MG clamp type: Level, hydraulic machinery 2platen Clamp-
Size range: 1100 ~ 4000 tons (
Custom size 6600 tons)
Injection Device: Hydraulic, reciprocating screw injection capacity: 85 to 1054 ounces, the speed is 141 copper.
/Sec application: large-
Part standard features: three shooting abilities per model, Xtreem control sdirect-
The proxy pancake barrel on the fixture reduces the template deflection by 50%.
Options: Windows-
Control based on Xtreem NT, cavity-
Pressure transfer, Stick Bar puller, hot sleeve configuration.
Series: Maxima MM clamp type: Level, hydraulic machinery 2-platen Clamp-
Size range: 310 to 880 tons injection device: electric, reciprocating screw injection capacity: speed of 153 cu in.
/Sec application: high
Standard features of speed forming: Accumulator-
Rotary auxiliary injection
Nozzle off-off, two-
District water pipe.
Series: babycast clamp type: horizontal, full hydraulic clamp-
Size range: 20-120 tons injection device: Hydraulic, reciprocating-
Screw injection capacity: 0. 13 to 0.
50 oz application: small parts standard features: New template concept reduces tool costs40%.
Series: Magna v clamp type: vertical, hydraulic toggle clamp-
Size range: 30 ~ Injection device of 300 tons: Hydraulic, reciprocating screw injection capacity: 0.
73 to 28 ounces at a rate of 19. 20 cu in.
/Sec application: standard function for Insert molding: Rotary, shuttle or fixed workbench. Closed-loop control.
Options: SPC, robot interface, injection-
Pressure drawing.
Series: power line clamp type: horizontal, electric toggle clamp-
Size range: 220-1125 tons injection device: electric, reciprocating screw or double-stage (750 and 935 tons)
Sample quantity: 21 ~ 148 oz, the sample rate is 89. 5 cu in.
/Sec application: standard features of precision molding: Air-
Cooling AC servo motor and ballscrewdrives.
Option: off-loop feed-
Throat temperature control.
Series: Roboshot I (from Fanuc Ltd. )
Clamp type: horizontal, electric toggle clamp-
Size range: 6 to 330 tons injection device: electric, reciprocating screw injection capacity: 0. 37 to 1.
95 ounces, rate from 0. 7 to 53. 2 cuin.
/Sec application: special molding standard function: AC servo motor on all spindle. Ball-
Screw operation for injection. Artificial-
Intelligent control for screw recovery, injection molding and mold protection.
The clamping and pop-up positioning accuracy is 0. 0004 in. Options: High-
Fast jet and jet. Series: E-
PET clamp type: horizontal, electric toggle clamp size: 440 tons
Standard features: 110x840 bar spacing; 840mm oz application: PET pre-forming; Internet-
NT xtreem NT control (all-PC)
Touch screen interface;
Piston with tip of rotary screw (
Prevent suspension of materialsup); high-Ejection speed (400mm/sec).
Demage plastics group-Sumitomo plasticsMachinery. DIMA, INC.
Series: DMH clamp type: horizontal, two-in-one hydraulic machineryplaten Clamp-
Size range: 270 to 5500 tons injection device: Hydraulic, reciprocating screw injection capacity: 86 to 882 ounces
Standard features: Off-large part size
Automatic clamping loop controlReset.
Series: DMT clamp type: horizontal, hydraulic toggle clamp-
Size range: 85 ~ Injection device of 650 tons: Hydraulic, reciprocating screw injection capacity: 3. 9 to 90.
2 oz application: General standard function: LCD display, off-
Loop ratio-valvecontrol.
Option: SPC, pop-up-the-fly.
Series: Dima II clamp type: Double-
Hydraulic Mechanical fixture for table plate-
Size range: 650 to 5000 tons injection unit: Hydraulic, reciprocating screw injection capacity: 86 to 1267 Oz application: standard features for large parts: High-
Precision post-
A separation lock system for large molds can be installed.
Use structural analysis to design a template that has an override. Series: Pro-
Type of P clamp: horizontal, hydraulic, double toggle clamp-
Size range: 25 to 850 tons injection unit: Hydraulic, reciprocating screw injection capability: 29 to 124 Oz application: Universal-
Standard features: mold storage system, self-
Simple production control after diagnosiscycle-
Time display and adjustable lens counter.
Engel Series: Victory clamp type: horizontal, hydraulic no stick clamp-
Size range: 28 to 660 tons injection device: Hydraulic, reciprocating screw application: universal standard function: improved mold channel, larger mold drawing space, pull core, etc. , modular.
Options: LSR/LIM, multiple
Gas injection, gas melt/water melt, foammelt, PIM. Series: E-
Type of sports clamp: horizontal, Electric no stick lever toggle clamp-
Size range: 60 to 385 tons injection device: electric, reciprocating screw standard features: Five-
Point toggle fixture with C-frame;
Mixing control during plastic refiningdirect (beltless)
Servo clamp drive.
Option: LSR/LIM version, X-Melt (
Expansion Molding)process.
Series: Speed clamp type: horizontal, hydraulic toggle clamp-
Size range: 135 to 550 tons injection device: Hydraulic, reciprocating screw application: universal, fast cycle standard function: Injection speed up to 1000mm/sec. Five-
Point double toggle clip, simple mold-
Highly adjustable, sensitive mold protection, control integrates robots and auxiliary equipment.
Series: Classic fixture type: horizontal, hydraulic toggle fixture-
Size range: 385-1000 tons injection device: Hydraulic, reciprocating screw application: standard features for large parts: 5-
Point double toggle fixture, simple mold-
Highly adjustable, sensitive mold protection, control integrates robots and auxiliary equipment.
Option: electric screw drive.
Series: double clamp type: horizontal, two-in-one hydraulic machineryplaten Clamp-
Size range: 720-6000 tons injection device: Hydraulic, reciprocating screw application: standard function for large parts: screw diameter.
Automatically retracts from 70 to 260mm.
Option: electric screw drive, extended daylight or mold-heightrange.
Series: Plug-In fixture type: vertical, full hydraulic fixture-
Size range: 30-300 tons injection molding machine: hydraulic or electric, reciprocating screw application: standard features for Insert molding: horizontal or vertical injection, double-orthree-
Position the turntable or shuttle, change the mold quickly, change the cylinder quickly, single-
The point height adjustment of the injection device, EC 100 control.
Series: macPET clamp type: Hydraulic, toggle clamp-
Size range: 275 to 550 tons injection device: Hydraulic, reciprocating screw application: PET pre-forming standard function: servo clamping
Control variables-
Volume Pump and hydraulic accumulator for quick locking-up time.
Patent application
Pressure mechanism. Series: e-
Maximum clamp type: horizontal electric toggle clamp-
Size range: 55 to 198 tons injection device: electric, reciprocating screw injection capacity: 1. 5 to 29. 0 cu in.
/Sec application: General standard function: compact unit;
Belt with water and connector and injection device driven by ball screw
Cooling servo motor;
Processing peakpress to 2800 bar (40,628 psi);
The injection speed is 450mm/second and the drying period is 1. 05 sec at 150-mm stroke.
Model: Engel Duo 2-series: injection molded composite fixtureplaten Clamp-
Size range: 495 to 6050 tons injection device: Reciprocating piston application: main production length-glass fiber-
Archival parts standard features for large automotive parts: continuous operation of Leistritz ZSE Maxxcompounding units and accumulators.
Extrusion and injection molding can be carried out separately.
Etelinger kunstowe maschin series: D-I-
M clamp type: horizontal or vertical, hydraulic no stick clamp size: 11 tons injection device: Hydraulic, horizontal or vertical-
Stage injection capacity: 0. 1 to 4.
5g application: Micro-forming standard features: In-
Screw/piston;
As an extended heating port of the hot runner.
Dragon FERROMATIK EuropeN. A. DIV.
Mira clone. Series: K-Tec, K-Tec S (high-speed)
Clamp type: horizontal, full hydraulic clamp-
Size range: 44 to 495 tons injection device: Hydraulic, reciprocating screw injection capacity: 21. 6g to 2400 kg (0. 8 to 84. 7 oz)
The rate is 223 cu in. /sec on S line.
Purpose: General or multi-purpose
Material with optional phonetic unit.
Standard features: Rotary injection device, three clip speed;
Gas Accumulator on high-speed S models.
Option: screw drive motor with higher speed and torque.
Series: Maxima MV clamp type: horizontal, hydraulic double-platen Clamp-
Size range: 220 to 385 tons injection device: Hydraulic, reciprocating screw injection capacity: 11. 6 to 69.
5 ounces for up to 69. 5 cu in.
Standard features: modular structure, IQT control.
Series: evolution clamp type: horizontal, fully electric clamp-
Size range: 33 ~ 330 tons injection device: fully electric, reciprocating screw injection capacity: 5.
9 to 981g applications: Universal and versatilematerial.
FORCEPRO series: electric clamp type: Spring-
Mechanical clamping and hydraulic clamping of rod-Size: 400-
1500 tons injection device: Mark-
IM unit with extruder and independent mold clamping injection capability: 1000 to 2500 lb/hr application: Universal and multi-purpose
Standard features of cavity: injection pressure up to 20,000 psi. Single-
Feeder or online composite extruder is provided.
Bench size up to 86x142.
Gaozhou Boqi Machinery Co. , Ltd. Distr.
Author: Norwell plastic Co. , Ltd.
Series: impact BTV
I clamp type: horizontal, hydraulic toggle clamp-
Size range: 80 tons to 1800 tons of injection device: Hydraulic, reciprocating screw injection capacity: 4. 5 to 434.
1 Application: Universal-
Standard features: Keba controller, 5-
Point toggle, linear position sensor for clamping/spraying, automatic
Cold cleaning function
Start Prevention.
Option: hydraulic core pull or unscrew unit, extension nozzle, high-
Variable speed injection-
Displacement pump, hydraulic oil-
Temperature control.
Series: Impact BVT-
II clamp type: horizontal, hydraulic toggle clamp-
Size range: 60 tons to 200 tons injection device: Hydraulic, reciprocating screw injection capacity: 4.
Applications for 5 to 434 ounces: General-
Standard features: Keba controller, 5-
Point switching for all major operating movements, linear position sensors, automatic
Cold cleaning function
Start the gear mechanism to prevent and adjust the mold.
Option: hydraulic core pull or unscrew unit, extension nozzle, high-
Variable speed injection-
Hydraulic pump, hydraulic oil temperature control.
Series: Master BMV-
I clamp type: horizontal, hydraulic toggle clamp-
Size range: 80 ~ Injection device of 320 tons: Hydraulic, reciprocating screw injection capacity: 4.
Applications from 5 to 434 ounces: high
Standard features of production molding: BM-
II controller with 10. 4-in.
Color screen, intelligent SPC control, flash memory card interface, graphic monitoring and analysis.
Series: Lightning BH clamp type: horizontal, hydraulic toggle clamp-
Size range: 15 tons to 55 tons injection device: Hydraulic, reciprocating screw injection capacity: 2. 1 to 2.
75 ounces of application: high
Standard features: Central lubrication, 4-
Stage fixture speed and pressure control, variable-
Displacement pump, injection speed 150mm/sec, pressure 38,860 psi, automatic clamping parallelism adjustment, linear position sensor for clamping, injection and injection.
Option: accumulator with injection speed of 300mm/second, linear guide for injection device, special screw design for different resin.
Series: Rainbow BTMI clamp type: hydraulic toggle clamp-
Size range: 120 to 480 tons injection device: horizontal, hydraulic, reciprocating screw injection capacity: 1.
Applications from 8 to 23 ounces: Two-
Standard features for injection molding: two injection units, rotary template, variable-
Displacement pump on the second injection device, color touch screen control. GLUCO INC.
Series: HS clamp type: vertical, full hydraulic clamp-
Size range: 100 to 300 tons injection unit: Hydraulic, horizontal reciprocating screw injection capacity: 6 to 14 oz application: standard features for Insert molding: C-
Frame clip, two positions pop up at the bottom shuttle.
Series: VS clamp type: vertical, full hydraulic clamp-
Size range: 10 to 75 ton injection unit: Hydraulic, vertical or horizontal reciprocating screw injection capability: 4 to 6 oz application: standard function for Insert molding: C-
Frame clip, nitrogen screw.
Optional: Shuttle or rotary bus (2-or 4-station)
Table, bottom pop-up, hot solid injection device.
Series: P-clamp type: vertical, pneumatic toggle clamp-
Size range: 20 tons to 60 tons injection device: pneumatic, horizontal top Rod injection capacity: 1. 75 to 2.
5 oz application: laboratory use, LSR, parting
Line injection standard function: timed off-off nozzle.
LS model of silicone molding.
Series: PM18 clamp type: vertical, pneumatic clamp-
Size range: 18 tons injection device: vertical, pneumatic thimble injection capacity: 1 to 1.
3 oz, 12,550 psi application pressure: Product development, standard function for shaping of shortrun insert: mold shuttle. Series: SM (
Multiplas from Taiwan)
Clamp type: horizontal, hydraulic clamp-
Size range: 50 tons to 550 tons injection device: Hydraulic, reciprocating screw injection capacity: 1. 4 to 77.
7 oz application: universal standard features: 6 Injection speeds and pressures, 4 hold pressures, 3 screw speeds and pressures, 2 brackets-
Forward speed and pressure, 4 clamping speed and pressure, 3 clamping opening speed and pressure, 2 injection speed and pressure, 2 cores-
Speed and pressure, hydraulic screw down sequence, luminous display, robot control function.
Option: Bosch proportional valve, dynamic injection and core pull, off-
Loop injection control, high
Speed injection mode, 10. 4-in.
Color TFT display.
Hpm a taylor\'s CO.
Series: free clamp type: horizontal, two-in-one hydraulic machineryplaten Clamp-
Size range: 460 to 5000 tons injection device: Hydraulic, reciprocating screw injection capacity: 14.
Standard features: Seimens PC-1 to 1372 oz applications: Large parts
Based on the TC03 controller, the platform minimizes the deflection and retracts the stick bar with a moving template;
Variable servo and proportional valves
Color plate volume pump
Panel Control Display, SPC, off-
Loop control of injection speed, packaging and holding pressure and back pressure.
Option: spinner for 180 [degrees]
The movement of the platform board, two-
Stage injection of accumulator
Auxiliary injection (to 500 cu in. /sec).
Series: modular fixture type: horizontal, full hydraulic fixture-
Size range: 220 to 4000 tons injection device: Hydraulic, reciprocating screw injection capacity: 7 to 1342 Oz application: standard features for large parts: modular design includes 12 fixtures and 11 injection devices;
Variable proportional valve
Displacement pump for clamping, pop-up, core-pull;
Self-Control
Diagnosis and SPC.
Option: Accumulator-
Auxiliary injection (to 500 cu in. /sec)
, Robotinterface, structural foam. Series: V2 (Trueblood)
Clamp type: vertical, full hydraulic clamp-
Size range: 6 ~ 40 tons of injection device: Hydraulic, reciprocating screw injection capacity: 0.
5 to 30 ounces for 5 ounces.
/Sec application: standard function for Insert molding for electronic, medical, automotive parts: two stick clamps; pull-
Lower cylinder of machine base;
A shuttle or turntable;
Vertical or horizontal injection; Allen-
Bradley controls.
Choice: Barber
Colman controller, off-
Injection Control of accumulator circuit
An auxiliary injection of up to 15 minutes. /sec.
Security light curtain, computer interface, automation interface, integrated material
Loading System for upper and/or lower die half, hydraulic core pull, nozzle close-off. Series: TB (Trueblood)
Clamp type: vertical, full hydraulic clamp-
Size range: 30 to 500 tons injection device: Hydraulic, reciprocating screw injection capacity: 1 to 110 ounces, the speed is 5 ounces.
/Sec application: standard function for Insert molding: C-
Injection horizontally or vertically, Allen-frame clip, shuttle or turntable
Bradley or Barber Colman control, multiple variables-volume pumps.
Option: off-
Closed loop process control
Loop back pressure control, SPC data collection, accumulator-
Auxiliary injection up to 15 in.
/Second, nozzle off-
Automatic interface for hydraulic pull core half of upper and lower die. Series: 4C (Trueblood)
Clamp type: vertical, full hydraulic clamp-
Size range: 30 to 500 tons injection device: Hydraulic, reciprocating screw injection capacity: 1 to 110 ounces, the speed is 5 ounces.
/Sec application: standard function of insert molding: Four-
Stick Bar clamp for shuttle or rotary table, Allen-
Bradley or Barber Colman control, multiple variables-volume pumps.
Option: off-
Closed loop process control
Loop back pressure control, SPC data collection, accumulator-
An auxiliary injection of up to 15 minutes.
/Second, nozzle off-
Automatic interface for hydraulic pull core half of upper and lower die.
Hull industrial company
Series: right Mac clamp type: horizontal, full hydraulic clamp-
Size range: 25 to 600 tons injection unit: Hydraulic, reciprocating screw or piston application: standard function for small or large parts: Smart-Mold closed-
Closed loop control system; vacuum-
Auxiliary ventilation.
Series: Parting line injection fixture type: vertical, full hydraulic fixture-
Size range: injection unit from 15 to 800 tons: horizontal, hydraulic reciprocating screw, ordirect piston application: standard features for Insert molding: 4-
Outboard top, shuttle, hardcore clip (Up and down), Smart-Mold closed-
Loop control system.
Options: hot sleeve and BMC injection; vacuum-
Auxiliary exhaust, shuttle configuration (
2 bottom mold half, single top half).
Husky Injection Molding System Co. , Ltd.
Series: hydraulic clamp type: horizontal, Hydraulic Mechanical doubleplaten Clamp-
Size range: injection device from 55 tons to 1100 tons: hydraulic reciprocating screw or double-
Stage of electric spiral drive injection capability: injection rate up to 358 cu in.
/Sec application: thin-
Standard features: PC-wall
More than 40 different injections based on Polaris control
Unit configuration, rotating injection device, large stick spacing.
The reflective template design minimizes deflection, enabling the mold to work in a lower tone.
Series: Square clamp type: horizontal, Hydraulic Mechanical doubleplaten Clamp-
Size range: 1500-8800 tons injection device: Hydraulic, reciprocating screw or double-
Standard stage function: PC-
Polaris control based on variables
Volume pump, up to 6-
Unit selection for each fixture size, more than 30 injectionsunit/clamp-
Size combination, expansion daylight for large molds and stacked molds.
The reflective platform plate design minimizes deflection.
Series: exponential fixture type: horizontal, Hydraulic Mechanical turret fixture-
Size range: 100-600 tons injection device: Hydraulic, reciprocating screw and double-
Standard function: PLC-stage application: PET pre-forming
Control based on PC interface, twoorfour-
The position turret provides additional cooling cycles or cores before launch.
Series: HyPAC clamp type: horizontal, hydraulic mechanical clamp-
Size range: 300 to 600 tonsspeed, thin-
Standard features for wall packaging: the new injection unit is designed to be 30% higher than the Hylectric model and has a faster melting acceleration.
250 micro control
Second response time
JSW Plastic Machinery Co. , Ltd. SUB.
Japanese steel factory Series: J-ELIII (large all-electric)
Clamp type: horizontal, electric toggle clamp-
Size range: 605 to 1430 tons injection device: electric, reciprocating screw injection capacity: 33 to 200 ounces
Standard features: Syscom 2000 touch-
Color LCD panel control, rotary injection device, dual servo motor drive injection. Series: J-ELIII-
UPS clamp type: horizontal, electric toggle clamp-size range: 38.
Injection Device from 5 to 198 tons: Hybrid Power, injection capacity of reciprocating screw: 0. 38 to 4.
Rate for 3 oz, 1000mm/second app: High-speed, thin-
Standard features for wall packaging: electric screw drive, accumulator-
Auxiliary injection with servovalve. Series: JT-
ELII clamp type: vertical, electric toggle clamp-
Size range: 22 tons to 110 tons injection device: horizontal and electric reciprocating screw injection capacity: 0. 54 to 4.
Standard features: Fixed table or servo-6 oz application: Insert molding
Drive the turntable; bell-
Crank toggle for low height. Series: J-ELIII (Large hydraulic)
Clamp type: horizontal hydraulic toggle clamp-
Size range: 605 to 1760 tons injection device: Hydraulic, reciprocating screw injection capacity: 59 to 331 Oz application: standard function for large parts for electrical, automotive, electronic products: syscon 2000 controller with color LCD and touch screen, SPC/SQC injection and Rotary program control allows up to six injection speeds
Injection pressure-
And keep pressure adjustment, cold screw start-up prevention.
Option: Very large machines from 2860 tons to 6600 tons are available (spec.
Data not available. Series: J-ELII (vertical)
Clamp type: vertical, full hydraulic clamp-size range: 24.
Injection Device from 2 to 242 tons: vertical, hydraulic reciprocating screw injection capacity: 0. 54 to 16.
Standard features: Single-5 oz application: Insert molding
Syscom 800 Tcontroller station and rotation model.
Option: Syscom 1000 T control, shuttle table. Series: J-
AD clamp type: horizontal, electric toggle clamp-
Size range: 35 ~ Injection device of 450 tons: electric, reciprocating screw injection capacity: 0. 4 to 11.
8 ounces of application: highspeed, thin-
Standard features of wall packaging: 62 micro servo circuits
Second response time
Injection speed of 9. 45 to 13. 78 in. /sec.
Injection weight and buffer control for template parallelism, advanced pressure control, predictive metering control, platform support mechanism and long template guide rail. KAWAGUCHI INC.
Series: KX clamp type: horizontal, hydraulic toggle clamp-
Size range: injection device from 55 to 700 tons: Hydraulic, reciprocating screw injection capacity: 5. 8 to 78.
4 oz application: General standard function: PC-
Closed-based control
Loop pump system.
Series: KXE clamp type: horizontal, electric toggle clamp-
Size range: 55 to 200 ton injection unit: electric, reciprocating screw injection capability: 52 to 334 cc application: universal standard function: hydraulic jet, PC-
Control based on 8. 5-in. color touch-screen.
Krauss maffy
Series: EX clamp type: electric, three-platen Clamp-
Size range: injection unit from 55 to 176 tons: horizontal, electric reciprocating screw application: Universal-
Standard features: Z-
Lever clamping device.
Series: Petform clamp type: horizontal, full hydraulic clamp-Size range: 192.
Injection Devices of 5 tons and 330 tons: Hydraulic, reciprocating screw, double-stage on330-
Ton injection: 48.
Application from month to 123 ounces: PET bottle blank, month, 72 cavity standard configuration: full set of equipment and molds, Servo Robot, andfour-stage preform-cooling device. Special shut-
Minimum Crystal problem.
Maintain the plasticity of the stage.
Series: C, C3 clamp type: horizontal, hydraulic machinery 2-platen Clamp-
Size range: 33 tons to 715 tons injection device: Hydraulic, reciprocating screw injection capacity: 0.
4 to 198 oz application: General standard function: MC4 control;
Accumulator assist on larger units.
Option: off-
Loop control, assist with the accumulator on smaller units.
The Duroset hot-solid model of 44 tons to 715 tons;
Polyset BMC model 44-462 tons.
Series: MX clamp type: horizontal, hydraulic machinery, doubleplaten Clamp-
Size range: 880 to 4400 tons injection device: Hydraulic, reciprocating screw injection capacity: 72.
Standard features: Application of accumulator-5 to 1392 ounces: Large parts
Auxiliary injection of parallelism and low mold wear, MC5 control, template guidance and support elements. Wear-
Plastic-reinforced device protected.
Series: CX clamp type: horizontal, hydraulic, doubleplaten Clamp-
Size range: 38 tons to 176 tons injection device: hydraulic or electric reciprocating screw injection capacity: 0.
4 oz and up applications: Universal-
Standard features of use: MC5 control.
Can drive the injection and injection system by electric or hydraulic.
The modular structure can be adapted to different needs. Series: KM-80-
Clamp cd Clamp type: horizontal, hydraulic Clamp size: 88 tons injection device: Hydraulic, reciprocating screw application: cd (CD, CD-R, DVD)
Standard function: provide turnkey system for CD production.
Series: IMC clamp type: horizontal, hydraulic machinery, doubleplaten (MC Series)Clamp-
Size range: 220-4400 tons injection device: Hydraulic, double-
Stage injection capacity: 62.
Application from 4 to 1463 ounces: directly in-
Long-line composite and molding
Standard properties of fiber composites: KMG 81 or 97 pairs
Screw compound extruder installed on piston injection device
The molten accumulator allows the extruder to run continuously.
Series: Silcoset clamp type: horizontal, Hydraulic Mechanical doubleplaten (C Series)Clamp-
Size range: injection device from 44 to 220 tons: hydraulic reciprocating screw injection capacity provided by double piston pump: 1. 4 to 16. 2 cu in.
Purpose: liquid silicone rubber (LSR)
Standard features: double hydraulic piston pump
Silicone;
Mixing composition and pigment of static mixer;
The barrel is cooled strongly.
Model: MX double-series: injection molding machine
Fixture for bench panel or CX hydraulic series-
Size range: 220 to 3520 tons injection device: Reciprocating piston application: main production length-glass fiber-
Standard function of filling parts for large car parts: continuous work
The threaded compound device and accumulator tank of KraussMaffei. L. K. MACHINERY, INC.
North American headquarters series: PT-
U-clamp type: Toggle clamp-
Size range: 88 to 495 tons injection device: two-cylinder injection capacity: 3.
6 to 60 oz application: any injection standard function: SPI robot interface, dual
Core traction, programmable air strike, mounting pad, dual auxiliary socket, SPC and ceramic heater belt.
LG International USA
Series: GoldStar H clamp type: horizontal, full hydraulic clamp-
Size range: 30 ~ Injection device of 1100 tons: Hydraulic, reciprocating screw injection capacity: 0. 8 to 251.
8 ounces at 69. 9 cu in.
/Sec application: General-
Standard features for use: DBG barrier screw, double cylinder, rotary injection device, HICOM-
Control 10 300. 4-in.
Color LCD controller, memory with 42 mold settings, optical encoder with position control.
Series: HS clamp type: horizontal, full hydraulic, clamp-
Size range: 90 tons to 250 tons injection device: Hydraulic, reciprocating screw injection capacity: 2. 9 to 40.
9 ounces for 24 ounces. 4 cu in.
/Secwithout accumulator, 51. 6 cu in.
/Sec with optional accumulator application: High-
Standard features of speed precision molding: HICOM-4000 closed-
Loop control of 10. 4-in.
Color LCD, SPC, optical encoder for position control
Volumepump, mold movement during plastic molding, pop-up-the-
Double liquid core traction, double liquid core traction, double liquid barrel, DBG screw.
Option: Accumulator-
Auxiliary injection.
Series: HM clamp type: horizontal, hydraulic mechanical clamp-
Size range: 1450 to 3300 tons injection device: Hydraulic, reciprocating screw injection capacity: 154. 2 to 573.
5 ounces, rate 89. 7 cu in.
Standard function: reduce machine length, turn off-
Proportional valve controlled by circulating injection process, DBG barrier type screw, bimetallicyllinder (except 3300-ton)
Dual hydraulic pull core, HICOM-
4000 and 10 controls. 4-in.
Color LCD, SPC, selfdiagnostics.
Series: M clamp type: horizontal, two-in-one hydraulic machineryplaten Clamp-
Size range: 500 to 1150 tons injection device: Hydraulic, reciprocating screw injection capacity: 38 to 251 ounces, rate is 64. 1 cu in.
/Sec application: General standard features: minimum deflection of light hollow casting formwork.
Rotate the barrel. HICOM-4000 closed-
Cycle control of 10. 4-in. color LCD, SPC;
DBG barrier screw, metal barrel.
Series: LGE clamp type: horizontal, toggle clamp-size range: 33-
330 tons injection device: Full-
American Meiji electric, reciprocating screwSeries: MC-
SJ clamp type: horizontal, full hydraulic clamp-
Size range: injection device from 55 to 1430 tons: Hydraulic, reciprocating screw injection capacity: 2.
3-361 oz application: universal standard function: Vistac 1000II control. Series: MC-
DM clamp type: horizontal, full hydraulic clamp-
Size range: injection device from 55 to 1430 tons: Hydraulic, reciprocating screw injection capacity: 2.
3-361 oz application: General standard function: Generator high-
Performance screw.
Option: Vistac 1000II control. Series: MC-
DF clamp type: horizontal, full hydraulic clamp-
Size range: injection device from 55 to 500 tons: Hydraulic, reciprocating screw injection capacity: 2. 3 to 51.
8 oz application: lowpressure, high-
Standard features for speed forming: Vistac 1000II control, high-Quick injection. Series: MC-
TS clamp type: horizontal, full hydraulic clamp-
Size range: injection device from 55 to 500 tons: Hydraulic, reciprocating screw injection capacity: 2. 3 to 51.
Standard function: Vistac 1000II control.
Series: DC clamp type: horizontal, full hydraulic clamp-
Size range: 715 and 1430 tons injection unit: Hydraulic, reciprocating screw injection capacity: 780 and 1553 Oz application: Low-
Standard features of pressure molding: Vistac Super II control.
Option: gas assist. Series: MC-
BMC clamp type: horizontal, full hydraulic clamp-
Size range: 110 to 500 tons injection device: Hydraulic, reciprocating screw injection capacity: 7. 6 to 51.
8 oz application: constant temperature BMC standard function: Vistac 1000II control.
Option: gas assist.
Series: MDIP clamp type: Hydraulic, hydraulic mechanical clamp-
Size range: 1430 tons injection device: Hydraulic, reciprocating screw injection capacity: 175 ounces
Standard function for wall parts: Vistac Super II control. Series: MC-
As clamp type: horizontal, full hydraulic clamp-
Size range: injection device from 55 to 165 tons: Hydraulic, reciprocating screw injection capacity: 1. 1 to 4.
Standard features: Vistac 1000 IIAS control. Application recommendation
Option: gas assist. Series: MB-
VR clamp type: vertical, full hydraulic clamp-
Size range: 770 to 1760 tons injection device: Hydraulic, reciprocating screw injection capacity: 7.
Applications from 6 to 96 ounces: more
Standard function for color molding: servo indexer for turntable, Vistac SuperIIVR control. Series: MC-
VR clamp type: vertical, full hydraulic clamp-
Size range: 38 to 110 tons injection device: Hydraulic, reciprocating screw injection capacity: 1 to 9.
6 oz application: standard features for Insert molding: turntable.
Series: NADEM clamp type: horizontal, electric/hydraulic hybrid clamp-
Size range: 88 to 550 tons injection device: Hydraulic, reciprocating screw injection capacity: 3. 9 to 45.
1 oz application: universal standard function: Vistac Alpha control.
Series: MDM clamp type: horizontal, full hydraulic clamp-
Size range: 44 tons and 77 tons injection device: Hydraulic, reciprocating screw injection capacity: 1.
Standard function: Vistac 1000IID control. Application recommendation
Option: gas assist.
Series: NS clamp type: horizontal, hydraulic mechanical clamp-
Size range: 1760 to 3300 tons injection device: Hydraulic, reciprocating screw application: Large parts
The fixture unit can achieve rapid and efficient mold movement. Touch-
Panel controller.
Longer screws for quick and uniform melting.
MHI injection molding Machinery Co. , Ltd. Series: MSJ (small sizes)
Clamp type: horizontal, full hydraulic clamp-
Size range: 90 tons to 320 tons injection device: Hydraulic, reciprocating screw injection capacity: 2.
5-40 oz app: universal standard features: MAC-
Variable VII controller
Discharge-volume pumpthe-fly, three-
The way the part is removed, two-
Stage fixture control, jet Purgecircuit, large stick spacing. Series: MSJ (mid-range)
Clamp type: horizontal, full hydraulic clamp-
Size range: 390 to 500 tons injection device: Hydraulic, reciprocating screw injection capacity: 40 to 80 oz application: universal standard features: UB screw with high plastic addition and mixing capacity; MAC-VII controller; eject on-the-fly; two-
Level clamp control, jet purification loop.
Series: MMJ clamp type: Level, hydraulic machinery \"2 1/2-platen\" Clamp-
Size range: 610 to 1200 tons injection device: Hydraulic, reciprocating screw injection capacity: 60 to 340 oz application: universal standard function: reduce the length of the machine;
UB screw with high molding capacity and mixing capacity; MAC-VII controller; eject on-the-fly; two-
Stage fixture control; automatic mold-
Thickness reading;
Jet aircraft; dual core-pull.
Series: ME clamp type: horizontal, electric toggle clamp-
Size range: 390 to 610 tons injection device: electric, reciprocating screw injection capacity: 40 to 80 oz application: universal standard function: AC servo motor on all spindle; heavy-Double-ball screws;
UB screw with high plastic mixing capacity; automatic mold-
Thickness setting;
Jet purification loop;
Memory of 64 mold group-ups;
No pressure control loop. MAC-
VIII controller with color LCD touch screen.
Series: MEt clamp type: horizontal, electric, double toggle clamp-
Size range: 38 to 330 tons injection device: electric, standard function of reciprocating screws: Servo Motor-
Drive belt and ball screw for main mechanical function. PCLS-
10 controls, small-
Footprint toggle fixture.
Series: em clamp type: horizontal, hydraulic machinery/electric hybrid, doubleplaten Clamp-
Size range: 720 to 1200 tons injection unit: electric, reciprocating screw injection capability: 110 and 160 oz application: universal standard function: all main movements are controlled by AC servo motor and provide space
Saving benefits in two ways
Platform clamping mechanism. Built-in servo-
The hydraulic system of the pump produces clamping force and operates the dual-core tension force.
UB screw with high molding capacity and mixing capacity; automatic mold-
Thickness setting; two-
Stage flip control;
Jet purification loop;
Memory of 64 mold group-ups;
No pressure control loop.
Series: MMIII clamp type: horizontal, Hydraulic Mechanical double-platen Clamp-
Size range: 1450 to 4400 tons injection device: Hydraulic, reciprocating screw injection capacity: 160 to 2100 Oz application: standard features for large parts: UB screw with high plastic addition and mixing capacity; MAC-VI controller; eject on-the-fly; two-
Stage fixture control; automatic mold-
Thickness reading;
Jet purification loop;
And double cordon. MINI-
Projector Machinery Co. , Ltd. Series: Mini-
Vertical, air compressor or direct hydraulic clamp-
Size Range: up to 12.
5 tons injection device: vertical top column or horizontal injection, dependent on model injection capacity: 0. 33 to 2.
15 oz application: standard function for insertion molding: The bench top model can be used only with air supply and 115 v current, and has an interchanging heating cylinder size and various injection capabilities.
The larger unit has a direct hydraulic screw drive and a direct hydraulic fixture that can hold up to 20 square feet of space. MIR USA CORP.
Series: electric clamp type: electric, toggle clamp-
Size range: 200 to 400 tons injection device: electric, reciprocating screw injection capacity: 10. 4 to 59.
3 ounces at a rate of 130mm/second (200-ton)
Purpose: General standard function: four AC servo motors. Direct (beltless)screwdrive;
There is no lubricant or grease in the clamping device;
Electric top rod without belt and gear; Internet-
Automatic e-ready controlmailing ofdata.
Series: HMPC clamp type: horizontal, Hydraulic Mechanical doubleplaten Clamp-
Size range: 860 to 9600 tons injection device: electric, reciprocating screw injection Capacity: up to 110 per barrel (X2)
Application: standard features for large parts: double clamp and double barrel for the largest model, Series: Atomic clamp type: electric, toggle clamp size: 154 to 440 tons negri bossi inc.
American series: Canbio clamp type: horizontal hydraulic toggle clamp-
Size range: 44 to 580 tons injection device: Hydraulic, reciprocating screw injection capacity: 2.
3-158 oz application: universal standard function: modular design, variable-
Can bus control architecture, PCcontrol, volume pump.
The remote telephone service is ready. Fullydigital.
Series: vector fixture type: horizontal, hydraulic toggle fixture-
Size range: 660 to 1650 tons injection device: electric, reciprocating screw injection capacity: 63 to 412 ounces
Output screw, hydraulic pump driven by energy-Save variables-
Speed motor.
Frequency conversion drive.
Variable rotary injection device
Displacement pump, Bosch hydraulic, CANbuscontrol structure, low shaft, overlapping motion (
Opening/closing, top-out and core).
Remote telephone service. Fully digital.
Series: Canbimat clamp type: horizontal hydraulic toggle clamp-
Size range: 90 tons to 350 tons injection device: Hydraulic, reciprocating screw injection capacity: 2. 3 to 36.
5 oz application: twoshot, two-
Standard function: Vertical and horizontal injection device.
The remote telephone service is ready. Fully digital.
Series: Canbel VE clamp type: electric, toggle clamp-
Size range: 77 to 935 tons jet unit: horizontal, electric, straight-
Driving reciprocating injection capacity: 2. 3 to 125.
9 oz application: standard features of precision molding: servo motor for injection molding of Siemens (2), clamp(1), and ejector (1).
The electric direct drive provides higher fixture speed and 2.
Energy saving 3%. belt-
Drive the ball screw.
Separate lubrationsystems ball screws and switches.
Option: users can combine the features of the Canbel and Canbio press to produce a hybrid design. Series: Bi-
Type of power clamp: horizontal, hydraulic (two-platen)Clamp-
Size range: 1485 to 6600 tons injection device: electric, reciprocating screw injection capacity: 100 to 2300 ounces
Output screw, hydraulic pump driven by energy-Save variables-
Speed motor.
Frequency conversion drive.
Variable rotary injection device
Displacement pump, Bosch hydraulic, CANbuscontrol structure, low shaft, overlapping motion (
Opening/closing, top-out and core).
Remote telephone service. Fully digital.
Chi Te Machinery Co. , Ltd.
Series: collaborative fixture type: horizontal, hydraulic toggle fixture-
Size range: injection device from 66 tons to 880 tons: Hydraulic, reciprocating screw injection capacity: 54.
5 to 85 Oz application: thin
Wall, precision parts (
For packaging, automotive, electronic products)
Standard function: Accumulator-
Auxiliary hydraulic, five-
More, More
Processor control.
Option: 2C model for multiple designs
Component forming. Series: PET-
Type of wire clip: horizontal, hydraulic toggle clip-
Size range: 385-660 tons injection device: hydraulic and electric, double-
Stage injection molding capacity: 118 to 232 Oz application: PET bottle blank, 32 192 hole standard configuration: Electric
Drive Plastic (two side-by-sideextruders)
Hydraulic piston injection on top
Pentium PC installation cooling station-
Based on control, 15-in.
Visualization of graphic processing. Series: e-
Type of spray clamp: horizontal, electric toggle clamp size: 55 tons injection device: electric, reciprocating screw injection capacity: 48.
3 cc application: CD (CD, DVD)
Standard features: Pentium PC-
Based on control, 15-in. CRT.
Series: Elion clamp type: electric, toggle clamp size: 55 to 192.
5 tons of injection device: horizontal, electric and reciprocating screw injection capacity: 0. 7 to 20.
4 oz application: Universal-
Standard features: Standard injection speed 250mm/second.
Novelcompact, Cam
Design like a toggle
Patented lubrication system for clamping.
Option: Injection speed of 450mm/second.
Xinxie Plastic Machinery Division
Japan\'s first nuclear power plant (AMERICA)
Series: large MD clamp type: horizontal, electric toggle clamp-
Size range: 385-2000 ton injection device: electric, reciprocating screw injection capability: 17-360 Oz application: Universal-
Standard features for use and precision molding: multiple servo motors and ballscrews drive injection and clamping.
Injection speed of 300mm/second.
Series: small MD clamp type: horizontal, electric toggle clamp-
Size range: 35 ~ Injection device of 385 tons: electric, reciprocating screw injection capacity: 0.
7-21 oz application: standard function for precision molding: graphic description of injection molding process, V-
Point switching, SPC monitoring, printer ports, expert functions automatically set the machine according to the data on the mold, parts and materials.
Injection speed of 300mm/second.
Series: NN clamp type: horizontal hydraulic toggle clamp-
Size range: 35 tons to 500 tons injection device: Hydraulic, reciprocating screw injection capacity: 0. 7 to 66.
2 oz application: General standard function: Five-point double-
Toggle clip for clamp, popup and injection, optical encoder, Blur-
Logic temperature control, spcmonitor, automatic clearing function.
Ningbo Hualu Machinery Manufacturing Co. , Ltd. CO. LTD. Distr. by: W. Z.
International professional playerInc.
Series: WZHTW clamp type: horizontal, hydraulic toggle clamp-
Size range: 66 tons to 2204 tons injection device: Hydraulic, reciprocating screw injection capacity range: from 2. 2 to 373.
9 oz application: Universal-
Features of use standards: more
Stage injection speed and pressure, graphical display of injection, hold and screw recovery, production and process monitoring, Vickers valves and pumps, Omron or Nais limit switches, TE or Fuji contactor saim or Intermot hydraulic motor, Gefran or Novo sensor, Mirle controller, 10. 4-in.
CRT or LCD screen.
Options: Accumulator injection, robot interface, 10-
Outline of the steps for injection, retention and recovery. T-
Trough plate, energy-
Save hydraulic pump.
Series: WZFT clamp type-
Vertical hydraulic fixture-
Size range: 12 tons to 210 tons injection device: vertical, hydraulic and reciprocating injection capability range: 1. 2 to 16.
7 oz application: standard function for Insert molding: four stickers for quick mold replacement, touch screen panel, double sliding table, hydraulic top bar, automatic nozzle lift. Options: FT-
DS model with sliding Template
R model with rotating template, FT-
P machine for pen making.
Nissin USA Ltd.
Series: AU3E clamp type: horizontal electric, tractor clamp size: 3.
2 tons of injection device: electric, two-
Stage injection capacity: 0. 1 oz (3 cc)
Standard function: AC servo motor for all motion, double-
Tiebarclamp, built in
Installed in the cooler/mold temperature controller on the trolley.
Series: HM7 Denkey clamp type: electric, direct clamp (no toggle)Clamp size: 7.
5 tons of injection device: electric, reciprocating screw injection capacity: 0.
3 oz application: Small Part standard function: servo motor with all motion built in
In the cooler and mold
Caster temperature controllermounted.
Series: Elject NEX clamp type: horizontal, electric toggle clamp-
Size range: 22 to 397 tons injection device: electric, reciprocating screw injection capacity: 0. 4 to 31.
2 oz applications: standard features for precision molding: the compact modular design allows for different injection units and lower bed layer heights.
There are 0 new controllers. 1-
Scan time MS for quick response.
Series: Clamp type: hydraulic Clamp-
Size range: injection device up to 87 tons: Hydraulic, double-
Stage injection Capacity: up to 17 cc, rate up to 2000mm/secondwall, high-
Standard function for speed filling: off-
Digital servo valve control loop, three threads.
Series: DC clamp type: horizontal, full hydraulic or electric toggle clamp-
Size range: 40 to 400 tons injection unit: two parallel hydraulic reciprocating screw applications: Two-color/two-
Material forming.
Standard function: double clamping cylinder, NC9300T control;
Two pop-ups run independently of the cycle-time savings. Series: TH-E, TH-RE, TD-E, TD-
RE clamp type: electric, vertical traction clamp-
Size range: 20 ~ Injection device of 155 tons: injection capacity of electric, vertical or horizontal reciprocating screw: 0.
Application of 4 to 12 ounces: standard features for Insert molding: Rotary injection device; four-tiebar clamp; two-
Station turntable driven by R-Type AC servo motorNC9300Tcontrol.
Series: TH clamp type: vertical, full hydraulic clamp-
Size range: 33 tons to 165 tons injection device: Hydraulic and vertical reciprocating screw injection capacity: 0. 4 to 5.
3 oz application: insert molded standard function: clamp the cylinder in the machine tool of the capsule.
Series: TD clamp type: vertical, full hydraulic clamp-
Size range: 110 to 220 tons injection device: Hydraulic, vertical or horizontal reciprocating screw injection capacity: 5 to 21.
6 oz application: Insert molding standard function: fixed or turntable clamping device, clamping the cylinder on the top of the machine tool, leaving space for the automation auxiliary equipment.
Series: PN clamp type: horizontal, full hydraulic clamp-
Size range: 22 tons to 66 tons injection device: Hydraulic, reciprocating screw injection capacity: 0. 4 to 3.
6 oz application: standard features for electronics and other small precision parts: digital settings