A. B.
Mechanical series: AB 300-
4 clamp type: vertical, pneumatic clamp size: 2 tons injection device: vertical, pneumatic screw injection capacity: 0.
25 oz application: laboratory testing, jewelry manufacturingPedal operation.
Injection, injection and clamping with adjustable electronic timer.
Absolute Haitian company
Series: Haitian Saturn HTFW clamp type: horizontal, hydraulic
Size range: 65-4000 tons injection device: Hydraulic, reciprocating screw injection capacity: 4-11 10 oz application: General standard features: 5-
Point toggle clip, water-
Feedback throat cooled by Keba controller, 10. 4-in.
Color LCD, robot interface, self
Diagnosis of closure
Loop control of injection speed, holding pressure, screw speed, back pressure.
Real ejection, air strike and cordon-the-fly.
Series: Haitian Mars clamp type: horizontal, toggle, servo electric pump drive lamp-
Size range: 65 to 2400 ton injection unit: Hydraulic, reciprocating screw injection capability: 1 to 800 Oz series: Haitian/zha Phil Venus clamp type: horizontal, hydraulic
Size range: 40 tons to 450 tons injection device: electric injection capacity: 0.
Applications from 5 to 30 ounces: highvolume/high-Quick injection.
Option: Multi-Technology Vertical fixture (35 to 500 tons)ARBURG, INC.
Series: full circle A clamp type: horizontal, electric toggle clamp size range: 55 to 220 tons injection device: electric, reciprocating screw injection capacity: 0. 34 to 15.
3 ounces for 29 copper.
/Sec application: high
Technical standard features: electric screw drive; Selogica 32-
Bit multi-processor control for graphic sequential programmingmodular design.
Option: electric drive on the movement of the ejector, core pull and/or nozzle.
Cavity pressure transfer, heat sleeve, MIMI, LSR and rubber; gas assist; multi-component.
Series: Full Circle C clamp type: horizontal, full hydraulic clamp-
Size range: 33 to 240 tons injection device: Hydraulic, reciprocating screw injection capacity: 1 to 29.
The oz9 rate is 70. 39 cu in.
/Sec application: parts from small to largeSelogica 32-
Bit multi-processor control with graphical sequence programming, integrated robotics and peripheral programmable.
Option: Accumulator-
Auxiliary injection;
Central injection;
Vertical partingline injection; cavity-
Transmission of pressure;
Hot sleeve, PET, MIM, LSR gas assist and multi
Component configuration.
Electric drive of plastic. Multi-
Component, overall selector.
Series: Gold Edition of all talents (Horizontal)
Clamp type: horizontal, full hydraulic clamp-
Size range: 44 to 510 tons injection device: Hydraulic, reciprocating screw injection capacity: 0. 7 to 45.
4 oz standard function: servo
Hydraulic system with double adjustment
Fast pumping technology
Switch valve technology and high wear
Resistance cylinder;
Selogica control system, input data through touch screen, graphics
Sequence programming and data storage based on compact flash cards.
Series: Gold Edition of all talents (Vertical)
Clamp type: vertical, full hydraulic clamp-
Size range: 88 & 110 tons injection device: Hydraulic, reciprocating screw injection capacity: 1 to 6.
1 ounce standard features: turntable diameter. 47. 2 in. ; servo-
Adjustable hydraulic system, double
Pump technology, fast
Switch valve technology and high wear
Barrel-resistant;
Selogica control system, input data through touch screen, graphics
Sequence programming and data storage based on compact flash cards.
Series: Full Circle K clamp type: horizontal, hydraulic toggle clamp-
Size range: 28 tons to 38 tons injection device: Hydraulic, reciprocating screw injection capacity: I to 2.
3 ounces for 4 ounces. 9 cu in.
/Sec application: small and medium-sized-size parts.
Standard features: modular structure, triple screw diameter, injection device that can be converted to vertical partingline position;
Selogicacon with graphics sequence programming and integration of robots and peripherals-
Programmable device.
Optional: stand fixture or convertible (
Horizontal/vertical)clamp.
Cavity pressure transfer, heat sleeve, injection molding, LSR and rubber.
Series: full round s clamp type: horizontal, full hydraulic clamp-
Size range: 14 tons to 620 tons injection device: Hydraulic, reciprocating screw injection capacity: 10. 3 to 65.
6 ounces at a rate of 119. 8 cu in.
/Sec application: Micro-styling of large parts.
Standard features: modular structure, closed
Loop adjustment of shooting unit;
32-graphics programmable
Multi-process control;
Rotate the barrel.
Option: Accumulator-
Auxiliary injection; cavity-
Transmission of pressure; Vario off-
Central injection; convertible (
Horizontal/vertical)
Clampand injection molding machine;
Various control expansion packages;
Electric drive of plastic.
Hot sleeve for LSR.
V1IM, gasassist, mucellations. Multi-component.
Series: Full Circle T-clamp type: vertical, full hydraulic clamp-
Size range: 44 to 220 tons injection device: Hydraulic, reciprocating screw injection capacity: 0. 47 to 15.
3 oz application: standard features of insert molding: turntable (two-or three-station, diam. 35 to59 in. )
, Convertible (
Horizontal/vertical)injectionunit; Selogica 32-
Bit multi-processor control for graphic programmingmodular design.
Option: Accumulator-
Auxiliary injection;
Hot sleeve, rubber, LIM.
Plastic, multi-electric drivecomponent.
Series: Full Circle U-clamp type: horizontal, full hydraulic clip-size range: 13.
Injection Device from 5 to 176 tons: Hydraulic, reciprocating screw, closed-
Injection ring speed regulation amount: 0. 34 to 15.
3 ounces for 49. 7 cu in.
Standard features: modular structure, the injection unit can be converted to vertical parting
Selogica 32-line location
Bit multi-processor control with graphical sequence programming and integrated robotics and peripherals-
Programmable device.
Option: Accumulator-
Auxiliary injection, vertical clip or convertible (
Horizontal/vertical)clamp.
Injection of parting line, heat sleeve, rubber, LIM.
Plastic, multi-electric drive
Component, overall selector.
Series: all-around V (
175 V, 275 V and 375 V)
Clamp type: vertical, full hydraulic clamp-
Size range: 14 tons, 28 tons, 55 tons injection device: Hydraulic and reciprocating screw injection capacity: 0. 34 to 9.
Standard features: modular structure, injection unit conversion, mold separation-
SeTlogica 32-line location
Bit multi-processor control with graphical sequence programming.
Options: cavity pressure transfer, heat
Swing desk, LSR and im, rotarytable or shuttle bus.
Car manufacturers, DIV.
MILACRON llc series: evolution EV fixture type: vertical, hydraulic C-frame Clamp-
Size range: 30 ~ Injection device of 280 tons: Hydraulic, reciprocating screw injection capacity: 0.
Applications from 73 to 34 ounces: standard functions for Insert molding: rotating, shuttling and fixing tables;
No iron clip; Vertex ST PC-based, closed-
Loop controller with 104-in.
Color LCD for 40 moldsups, SPC, user-
Configurable fastSet screens.
Option: vertex NT controller (Windows NT)
Built-in Internet browser. BATTENFELD (
Fierce pattinfield)
Series: Plus clamp type: horizontal, full hydraulic clamp-
Size: 38 tons injection device: Hydraulic, reciprocating screw injection capacity: 0. 8 to 2.
3 ounces for 6 ounces. 5 cu in.
/Sec application: General-
Standard features: Two-
Variable hardcore clip
UnilogB2 control with graphical interface, integrated control cabinet with space saving. Series: TM, TM-
Type of enhanced fixture: horizontal hydraulic toggle fixture-
Size range: 120 to 550 tons injection device: Hydraulic, reciprocating screw injection capacity: 6. 2 to 68.
2 ounces, Price 37. 3 cu in.
/Sec application: General standard function: Five-
Point switching, rotating bucket, Unilog B6control.
Enhanced closed-loop servo-
Valve control and accumulator assist as an option. Series: HM Two-
Flat clamp type: flat clamp-
Size range: Injection-720 tons Injection device: Hydraulic, reciprocating screw Injection capacity: 38. 9 to 190.
4 ounces for 65 copper.
/Sec application: standard function for large parts: wide bench plate for large parts and molds.
Unilog B6 control.
Option: servo electric screw drive.
Series: HM three
Fixture type: horizontal, full hydraulic fixture-
Size range: 50 tons to 330 tons injection device: Hydraulic, reciprocating screw injection capacity: 0. 9 to 29.
3 ounces, rate 29. 2 cu in.
/Sec application: general purpose and high precision molding standard features: compact design, three
Parts disassembly, rotating barrels, variables-
Electronic regulating pump (s)
Unilog 86B6 control with color screen, SPC, remote diagnostics and 4 USB ports.
Option: electric screw drive; twin-
The pump system allows parallel clamping and spiral movement and increases the injection capacity.
Series: EM clamp type: horizontal, electric toggle clamp-
Size range: 33 ~ Injection device of 330 tons: electric, reciprocating screw injection capacity: 0. 6 to 21.
8 ounces, rate 34. 5 cu in.
/Sec application: General-
Standard features: Four servo motors, Unilog B6 control.
Series: Micro System 50 clamp type: horizontal electric stick clamp size: 5.
5 tons of injection device: electric, three-stage (two-plunger)
Injection capacity: 0. 0169 to 0.
Application of 169 ounces: micro-machining standard features of parts from 25 mg to 1g: fixture positioning is accurate to less than 0. 01 mm.
Injection accuracy 0. 001 mm.
The rotary mold Workbench allows injection molding and ejection at the same time.
It can be injected into the parting line to a minimum volume. Clean-room enclosure.
Unilog B4 control. Options: Two-
Color capability, servo
Controllable ejection, insertion molding, powder metal or ceramic molding.
Series: vertical M
R clamp type: vertical, hydraulic clamp size: 44 ~ 3000 tons injection device: injection capacity of horizontal or vertical, hydraulic and reciprocating ironing plates: 0. 9 to 29.
3 oz application: standard function of insert molding: rotary table Formula operation.
Series: vertical VM clamp type: vertical, hydraulic clamp size: 66 to 220 tons injection device: vertical, hydraulic, reciprocating screw injection capacity: 2.
Standard features from 4 to 19 ounces: Unilog B6control.
Options: robots and moldschange systems.
Boy Machine Company
Series: Procan ALPHA model boys XS to 90A clamp type: horizontal, vertical; hydraulic two-platen Clamp-
Size range: 1 I to 99 tons injection device: Hydraulic, vertical reciprocating ironing plate injection capacity: 0 sets. 15 oz. to 8. 89 oz.
Application: General standard features: cantilever flap, variable-
Procan ALPHA enclosed volume pump-
With color touch screen, four programmable inputs and outputs and 128-
MB Flash Drive for data storage.
Options: LSR, PVC, hot solid, elastic, insert, PIM, Micro
Mold and ceramic mold plate.
Series: Procan alpha boy 55E, 901 clamp type: horizontal, two plate clamp size range: 60 tons-100 tons injection device: horizontal reciprocating screw injection capacity: 5. 57 to 8.
90 oz application: General standard function: servo-
Motor pump drive with four programmable inputs and outputs, color touch screen and 128-Procan ALPHA closed loop
MB Flash Drive for data storage.
Options: LSR, PVC, hot solid, elastic material, p1 m, Micro
Molding and ceramic forming versions.
Series: Procan alpha boy xsv, 22 aw, 22AVH, 35AVV, 55AVV clamp type: vertical, hydraulic dual-platen Clamp-
Size range: 11 tons-60 tons injection unit: Hydraulic, vertical or hori zontal reciprocating screw injection capability: 0. 15 to 5.
Standard features: variables-volume pump;
Procan ALPHA off-
4 programmable inputs and outputs, color touch screens and 128-
MB Flash Drive for data storage.
Options: LSR, PVC, hot solid, elastic, PIM, Micro
Mold and ceramic mold plate.
Demage plastics group-Sumitomo plasticsMachinery.
Engel Series: Victory clamp type: horizontal, hydraulic no stick clamp-
Size range: 28 to 660 tons injection device: Hydraulic, reciprocating screw application: universal standard function: improved mold channel, larger mold drawing space, pull core, etc. , modular.
Options: LSR/LIM, multiple
Gas injection, gas melt/water melt, foammelt, PIM. Series: E-
Type of sports clamp: horizontal, Electric no stick lever toggle clamp-
Size range: 60 to 385 tons injection device: electric, reciprocating screw standard features: Five-
Point toggle fixture with C-frame;
Mixing control during plastic refiningdirect (beltless)
Servo clamp drive.
Option: LSR/LIM version, X-Melt (
Expansion Molding)process.
Series: Speed clamp type: horizontal, hydraulic toggle clamp-
Size range: 135 to 50 tons injection device: Hydraulic, reciprocating screw application: universal, fast circulation standard features: Injection speed up to 1000mm/sec. Five-
Point double toggle clip, simple mold-
Highly adjustable, sensitive mold protection, control integrates robots and auxiliary equipment.
Series: Classic fixture type: horizontal, hydraulic toggle fixture-
Size range: 385-1000 tons injection device: Hydraulic, reciprocating screw application: standard function for large parts: 5-
Point double elbow clip, simple mold-
Highly adjustable, sensitive mold protection, control integrates robots and auxiliary equipment.
Option: electric screw drive.
Series: double clamp type: horizontal, two-in-one hydraulic machineryplaten Clamp-
Size range: 720-6000 tons injection device: Hydraulic, reciprocating screw application: standard function for large parts: screw diameter.
Automatically retracts from 70 to 260mm.
Option: electric screw drive, extended daylight or mold-heightrange.
Series: Plug-In fixture type: vertical, full hydraulic fixture-
Size range: 30 tons to 300 tons injection device: hydraulic or electric, reciprocating screwdriveror three-
Position the turntable or shuttle, quickly change the mold, quickly change the bucket, single
The point height adjustment of the injection device is controlled by EC 100.
Series: macPET clamp type: Hydraulic, toggle clamp-
Size range: 275 to 550 tons injection device: Hydraulic, reciprocating screw application: PET pre-forming standard function: clamping by servo control variable-
Volume Pump and hydraulic accumulator for quick lock-up time.
Patent holding-
Pressure mechanism. Series: e-
Maximum clamp type: horizontal electric toggle clamp-
Size range: 55 to 198 tons injection device: electric, reciprocating screw injection capacity: 1. 5 to 29. 0 cu in.
/Sec application: General standard function: compact unit;
Beltand ballscrew driven toggle fixture and injection device with water
Cooling servo motor;
Control the peak pressure at 2800 bar (40,628 psi);
The injection speed is 450mm/second and the drying period is 1.
150mm trip 05 seconds.
Model: Engel Duo 2-series: injection molded composite fixtureplaten Clamp-
Sizerange: injection unit from 495 to 6050 tons: Reciprocating piston application: main production length-glass fiber-
Archival parts standard features for large automotive parts: continuous operation of Leistritz ZSE Maxxcompounding units and accumulators.
Extrusion and injection molding can be carried out separately.
Etelinger kunstowe maschin series: D-I-
M clamp type: horizontal or vertical, hydraulic no stick clamp size: 11 tons injection device: Hydraulic, horizontal or vertical-
Stage injection capacity: 0. 1 to 4.
5g application: Micro-forming standard features: In-
Screw/piston;
As an extended heating port of the hot runner.
Dragon FERROMATIK EuropeN. A. DIV.
Mira clone. Series: K-Tec, K-Tec S (high-speed)
Clamp type: horizontal, full hydraulic clamp-
Size range: 44 to 495 tons injection device: Hydraulic, reciprocating screw injection capacity: 21. 6g to 2400 kg (0. 8 to 84. 7 oz)
The rate is 223 cu in. /sec on S line.
Purpose: universal or multi-material with optional insert unit.
Standard features: Rotary injection device, three clip speed;
Gas Accumulator on high-speed S models.
Option: screw drive motor with higher speed and torque.
Series: VITESSE clamp type: horizontal, full hydraulic clamp-
Size range: 220 to 550 tons injection device: Hydraulic, reciprocating screw, electric screwdriver injection capacity: 14. 0 to 73.
5 ounces for up to 200. 0 cu in.
Standard features: modular construction, mosaic control.
Series: evolution clamp type: horizontal, fully electric clamp-
Size range: 33 ~ 330 tons injection device: fully electric, reciprocating screw injection capacity: 5.
9 to 981g applications: Universal and versatilematerial. GLUCO INC.
Series: HS clamp type: vertical, full hydraulic clamp-
Size range: 100 to 300 tons injection unit: Hydraulic, horizontal reciprocating screw injection capacity: 6 to 14 ounces
Frame clip, double position shuttle with bottle stopper.
Series: VS clamp type: vertical, full hydraulic clamp-
Size range: 10 to 75 ton injection unit: Hydraulic, vertical or horizontal reciprocating screw injection capability: 4 to 6 oz application: standard function for insert mold: C-
Frame clip, nitrogen screw.
Optional: Shuttle or rotary bus (2-or 4-station)
Table, bottom pop-up, hot solid injection device.
Series: P-clamp type: vertical, pneumatic toggle clamp-
Size range: 20 tons to 60 tons injection device: pneumatic, horizontal top Rod injection capacity: 1. 75 to 2.
5 oz application: laboratory use, LSR, parting
Line injection standard function: timed off-off nozzle.
LS model of silicon.
Series: PMl8 clamp type: vertical, pneumatic clamp size: 18 tons injection device: vertical, pneumatic piston injection capacity: 1 to 1.
3 oz, 12,550 psi application pressure: Product development, standard function for shaping of shortrun insert: mold shuttle. Series: SM (
Multiplas from Taiwan)
Clamshell type: horizontal, hydraulic fixture-
Size range: 50 to 550 tons injection device: Hydraulic, reciprocating screw injection capacity: I. 4 to 77.
7 oz application: universal standard features: 6 Injection speeds and pressures, 4 hold pressures, 3 screw speeds and pressures, 2 brackets-
Forward speed and pressure, 4 clamping speed and pressure, 3 clamping opening speed and pressure, 2 injection speed and pressure, 2 cores-
Speed and pressure, hydraulic screwing sequence, electric
Display of light, robot control function.
Option: Bosch proportional valve, dynamic injection and core pull, off-
Loop injection control, high
Speed injection mode, 10. 4-in.
Color TFT display.
Husky Injection Molding System Co. , Ltd.
Series: hydraulic clamp type: horizontal, Hydraulic Mechanical doubleplaten Clamp-
Size range: 55 to 1 100 ton injection unit: hydraulic reciprocating screw or double-
Stage of electric spiral drive injection capability: injection rate up to 358 cu in.
/Sec application: thin-
Standard features: PC-wall
More than 40 different injections based on Polaris control
Unit configuration, rotating injection device, large rod spacing.
The reflective template design minimizes deflection, enabling the mold to work in a lower tone.
Series: Quadloc 2-
Fixture type of table plate: Level, hydraulic machinery 2-platen Clamp-
Size range: 1500-8800 tons injection device: Hydraulic, reciprocating screw or double-
Standard stage function: PC-
Polaris control based on variables
Volume pump, up to 6-
Unit selection for each fixture size, more than 30 injectionsunit/clamp-
Size combination, expansion daylight for large molds and stacked molds.
The reflective platform plate design minimizes deflection.
Series: exponential fixture type: horizontal, Hydraulic Mechanical turret fixture-
Size range: 100-600 tons injection device: Hydraulic, reciprocating screw and double-
Standard function: PLC-stage application: PET pre-forming
Control based on PC interface, twoorfour-
The position turret provides additional cooling cycles or cores before launch.
Series: HyPAC clamp type: horizontal, hydraulic mechanical clamp-
Size range: 300-600 tonsspeed, thin-
Standard features for wall packaging: the injection unit design is 30% higher than the throughput of the Hylectric model and has a faster melting acceleration.
Control deliver250 Micro
Second response timeSeries: In-
Wire clip type: Square series 2-platen Clamp-
Size range: 550 to 5940 tons injection device: Reciprocating piston application: main production length-glass fiber-
Standard features of filling parts for large car parts: non-continuous operation of Copcrion ZSK coroting twin screw extrusion compound machine and husky shooting pottechnology.
JSW Plastic Machinery Co. , Ltd. SUB.
Japanese steel factory Series: J-ELIII (large all-electric)
Clamp type: horizontal, electric toggle clamp-
Size range: 605-1430 tons injection device: electric, reciprocating screw injection capacity: 33-200 ounces
Standard function for precision large parts: Syscom 2000 touch screen control with color LCD, rotary injection device, injection device driven by dual servo motor. Series: J-ELIII-
UPS clamp type: horizontal, electric toggle clamp-size range: 38.
Injection Device from 5 to 198 tons: Hybrid Power, injection capacity of reciprocating screw: 0. 38 to 4.
Rate for 3 oz, 1000mm/second app: High-speed, thin-
Standard features for wall packaging: electric screw drive, accumulator-
Auxiliary injection with servo valve. Series: J-
ELII clamp type: vertical, electric toggle clamp-
Size range: 22 to I 10 tons injection device: horizontal, electric reciprocating screw injection capacity: 0. 54 to 4.
6 oz application: standard function for insert mold: Fixed table or servo-
Drive the turntable; bell-
Crank toggle for low height. Series: JT-ELII (Large hydraulic)
Clamp type: horizontal hydraulic toggle clamp-
Size range: 605 to 1760 tons injection device: Hydraulic, reciprocating screw injection capacity: 59 to 33 I oz application: standard function for large parts for electrical, automotive, electronic products: syscon 2000 controller with color LCD and touch screen, SPC/SQC injection and Rotary program control allows up to six injection speeds
Injection pressure-
And keep pressure adjustment, cold screw start-up prevention.
Option: Very large machines from 2860 tons to 6600 tons are available (
Specifications, data not available). Series: J-ELII (vertical)
Clamp type: vertical, full hydraulic clamp-size range: 24.
Injection Device from 2 to 242 tons: vertical, hydraulic reciprocating screw injection capacity: 0. 54 to 16.
Application of 5 ounces: standard function for inserting molds: Single
Syscom 800 Tcontroller station and rotation model.
Option: Syscom 1000 T control, shuttle table. Series: J-
AD clamp type: horizontal, electric toggle clamp-
Size range: 35 ~ Injection device of 450 tons: electric, reciprocating screw injection capacity: 0. 4 to 1 1.
8 ounces of application: highspeed,thin-
Standard features of wall packaging: 62 micro servo circuits
Second response time
Injection speed of 9. 45 to 13. 78 in. /sec.
Injection weight and buffer control for template parallelism, advanced pressure control, predictive metering control, platform support mechanism and long template guide rail.
Krauss maffy
, Injection molding process Series: EX clamp type: electric, three-platen Clamp-
Size range: 55 to 176 tonsininjection unit: horizontal, electric reciprocating screw application: General-
Standard features: Z-
Lever clamping device.
Series: Petform clamp type: horizontal, full hydraulic clamp-Size range: 192.
Injection Devices of 5 tons and 330 tons: Hydraulic, reciprocating screw, double-stage on330-
Ton injection: 48.
Application from month to 123 ounces: PET bottle blank, 8to 72 cavity standard configuration: full set of equipment and molds, Servo Robot, andfour-stage preform-cooling device. Special shut-
Minimum Crystal problem.
Maintain the plasticity of the stage.
Series: C, C3 clamp type: horizontal, hydraulic machinery 2-platen Clamp-
Size range: 33 tons to 715 tons injection device: Hydraulic, reciprocating screw injection capacity: 0.
4-198 oz application: General standard function: MC4 control;
Accumulator assist on larger units. Option: off-
Loop control, assist with the accumulator on smaller units.
The Duroset hot-solid model of 44 tons to 715 tons;
The BMC yset BMC model ranges from 44 tons to 462 tons.
Series: MX clamp type: horizontal, hydraulic machinery, doubleplaten Clamp-
Note: 880 ~ 4400 tons of injection unit: Hydraulic, reciprocating screw injection: 72.
Applications from 5 to 1392 ounces: standard features for large parts: Accumulator-
Auxiliary injection, MC5 control, platform and support elements for parallelism and low mold wear. Wear-
Plastic-reinforced device protected.
Series: CX clamp type: horizontal, hydraulic-Two machinesplaten Clamp-
Injection Device: hydraulic orelectric-38 to 176 tons
Reciprocating screw injection capacity: 0.
4 oz and upapplication: General-
Standard features of use: MC5 control.
Can drive the injection and injection system by electric or hydraulic.
The modular structure allows for adaptation to different needs. Series: KM-80-
Clamp cd Clamp type: horizontal, hydraulic Clamp size: 88 tons injection device: Hydraulic, reciprocating screw application: cd (CD, CD-R, DVD)
Standard function: provide turnkey system for CD production.
Series: IMCClamp type: horizontal, hydraulic-Two machinesplaten (MC. Series)Clamp-
Size range: 220-4400 tons injection device: Hydraulic, double-
Stage injection capacity: 62A to 1463 oz application: direct input-
Long line impact and molding
Standard properties of fiber composites: KMG 81 or 97 twin-
Screw compound extruder installed on piston injection device;
The molten accumulator allows the extruder to run continuously.
Series: Silcoset clamp type: horizontal, Hydraulic Mechanical doubleplaten (C Series)Clamp-
Size range: 44 to 220 tons injection device: hydraulic reciprocating screw injection capability supplied by double piston pump: 1. 4 to16. 2 cu in.
Purpose: liquid silicone rubber (LSR)
Standard features: double hydraulic piston pump
Silicone components;
Mixing composition and pigment of static mixer;
The barrel is cooled strongly.
Model: MXtwo-series: injection molding machine
Fixture for bench panel or CX hydraulic series-
Size range: 220 to 3520 tons injection device: Reciprocating piston application: main production length-glass fiber-
Standard function of archival parts for large car parts: continuous work
The threaded compound device and accumulator tank of KraussMaffei. LK. MACHINERY, INC.
North American headquarters series: PT-
U-clamp type: Toggle clamp-
Size range: 88 to 495 tons injection device: two-cylinder injection capacity: 3.
Standard function: SPI robot interface, dual-
Corepull, programmable blowing, mounting pad, dual auxiliary socket, spc and ceramic heater belt. MARUKA U. S. A. INC. / TOYO All-electric servo-
The size of the drive injection molding machine ranges from 35 tons to 940 tons.
In horizontal, vertical and double-shot co-injection. The Si-
The IV control is very user friendly and includes the most popular features and process monitoring features of the day.
American companySeries: MC-
SJ clamp type: horizontal, full hydraulic clamp-
Size range: 55 ~ 1430 tons of injection device: Hydraulic, reciprocating screw injection capacity: 2.
Application from 3 to 361 ounces: universal standard function: Vistac 100011 control. Series: MC-
DM clamp type: horizontal, full hydraulic clamp-
Size range: injection device from 55 to 1430 tons: Hydraulic, reciprocating screw injection capacity: 2.
3-361 oz application: General standard function: Generator high-
Performance screw.
Option: Vistac1000II control. Series: MC-
DF clamp type: horizontal, full hydraulic clamp-
Size range: injection device from 55 to 500 tons: Hydraulic, reciprocating screw injection capacity: 2.
Applications from 3 to 361 ounces: universal standard features: high performance screws for generators.
Optional: Vistac 1000I1 control. Series: MC-
DF clamp type: horizontal, full hydraulic clamp-
Size range: SS to S00 ton injection device: Hydraulic, reciprocating screw injection capacity: 2. 3 to S1.
8 oz application: lowpressure, high-
Speed forming standard * Features: Vistac 1000II control, high-Quick injection. Series: MC-
TS clamp type: horizontal, full hydraulic clamp-
Size range: injection device from 55 to 500 tons: Hydraulic, reciprocating screw injection capacity: 2. 3 to 51.
8-12 oz application: standard function of thermoset plastic: Vistac 1000I1 control.
Series: DC clamp type: horizontal, full hydraulic clamp-
Size range: 715 and 1430 tons injection unit: Hydraulic, reciprocating screw injection capacity: 780 and 1553 Oz application: Low-
Standard function for pressure molding: Vistac Super II control.
Option: gas assist. Series: MC-
BMC clamp type: horizontal, full hydraulic clamp-
Size range: 110 ~ Injection device of 500 tons: Hydraulic, reciprocating screw injection capacity: 7. 6 to 51.
Thermoac 1000II control: 8 oz application: hot solid BMCStandard function.
Option: gas assist.
Type: Hydraulic, Hydraulic Mechanical fixture-
Size range: 1430 tons injection device: Hydraulic, reciprocating screw injection capacity: 175 ounces
Standard function for wall parts: Vistac Super II control. Series: MC-
As clamp type: horizontal, full hydraulic clamp-
Size range: injection device from 55 to 165 tons: Hydraulic, reciprocating screw injection capacity: 1. 1 to 4.
Standard features: Visrac 1000 IIAScontrol 8 oz application: precision and medical parts.
Option: gas assist. Series: MB-
VR clamp type: vertical, full hydraulic clamp-
Size range: 770 to 1760 tons injection device: Hydraulic, reciprocating screw injection capacity: 7.
Applications from 6 to 96 ounces: more
Standard function for color adjustment: servo indexer for turntable, Vistac Super IIVRcontrol. Series: MC-
VR clamp type: vertical, full hydraulic clamp-
Size range: 38 to 110 tons injection device: Hydraulic, reciprocating screw injection capacity: I to 9.
6 oz application: standard features for Insert molding: turntable.
Series: NADEM clamp type: horizontal, electric/hydraulic hybrid clamp-
Size range: 88 to 550 tons injection device: Hydraulic, reciprocating screw injection capacity: 3. 9 to 45.
1 oz application: universal standard function: Vistac Alpha control.
Series: MDMClamp type: horizontal, full hydraulic fixture-
Size range: 44 tons and 77 tons injection device: Hydraulic, reciprocating screw injection capacity: 1.
Standard function: Vistac 1000IID control. Application recommendation
Option: gas assist.
Series: NS clamp type: horizontal, hydraulic mechanical clamp-
Size range: 1760-3300 tons injection device: Hydraulic, reciprocating screw application: Large parts
The fixture unit can move the mold quickly and efficiently. Touch-
Panel controller.
Longer screws for quick and uniform melting.
Milacron llc injection molding machine Series: Magna Tg clamp type: horizontal, hydraulic toggle clamp-
Size range: 170 to450 ton injection device: Hydraulic, reciprocating screw injection capacity: 3.
Application from 8 to 54 ounces: high
Output molding standard features: proportional hydraulic motor with accurate positioning to 0. 001 in. , closed-
Hydraulic core pulling, loop process control, three-Air jet on stage.
Optional: monthly hermoset coordination, pliers
Hillburn tonnage reading-
Dual Programmable kernel output detection.
Series: Maxima MG clamp type: Level, hydraulic machinery 2platen Clamp-
Size range: 100 to 4000 tons (
Custom size 6600 tons)
Injection Device: Hydraulic, reciprocating screw injection capacity: 85 to 1054 ounces, the speed is 141 copper.
/Sec application: large-
Part standard features: three shooting abilities per model, Xtreem control sdirect-
The proxy pancake barrel on the fixture reduces the template deflection by 50%.
Options: Windows-
Control based on Xtreem NT, cavity-
Pressure transfer, Stick Bar puller, hot sleeve configuration.
Series: Maxima MM clamp type: Level, hydraulic machinery 2-platen Clamp-
Size range: 310 to 880 tons injection device: electric, reciprocating screw injection capacity: speed of 153 cu in.
/Sec application: high
Standard features of speed forming: Accumulator-
Rotary auxiliary injection
Nozzle off-off, two-
District water pipe.
Series: babycast clamp type: horizontal, full hydraulic clamp-
Size range: 20-120 tons injection device: Hydraulic, reciprocating-
Screw injection capacity: 0. 13 to 0.
50 oz application: small parts standard features: New template concept reduces tool costs40%.
Series: Magna v clamp type: vertical, hydraulic toggle clamp-
Size range: 30 ~ Injection device of 300 tons: Hydraulic, reciprocating screw injection capacity: 0.
73 to 28 ounces at a rate of 19. 20 cu in.
Standard features: rotating, shuttle, or fixed table. Closed-loop control.
Options: SPC, robot interface, injection-
Pressure drawing.
Series: power line clamp type: horizontal, electric toggle clamp-
Size range: 220-1125 tons injection device: electric, reciprocating screw or double-stage(
750 tons and 935 tons)
Injection capacity: 21 to 148 ounces with an injection rate of 89. 5 cu in.
/Sec application: standard features of precision molding: Air-
Cooling AC servo motor and ballscrew drives.
Option: off-loopfeed-
Throat temperature control.
Series: Roboshot I (from Fanuc Ltd. )
Clamp type: horizontal, electric toggle clamp-
Size range: 6 to 330 tons injection device: electric, reciprocating screw injection capacity: 0. 37 to 1.
95 ounces, rate from 0. 7 to 53. 2 cuin.
/Sec application: special molding standard function: AC servo motor on all spindle. Ball-
Screw operation for injection. Artificial-
Intelligent control for screw recovery, injection molding and mold protection.
Positioning accuracy /-0. 0004 in. Options: High-
Speed of injection and injection. Series: E-
PET clamp type: Level, electric clamp size: 440 tons
Stage injection capacity: 110 ozapplication: PET pre-forming standard function: 840x840mm bar spacing; Internet-
Ready Xtreem NT control (all-PC)
Interface with touch screen;
Piston with tip of rotating screw (
Prevent suspension of materialsup); high-Ejection speed (400 mm/sec).
Negri bossi Canbio II fully digital hydraulic switching machine from 75 tons to 800 tons.
With automatic tie
In the process of mold replacement, more flexibility can be provided. The electric-
Even with the use of the machine at the maximum performance level, the hydraulic system provides efficient energy consumption.
Digital network connecting server
The pump and proportional valves provide high communication efficiency with the machine control system and also allow monitoring and setting up
Start the machine parts directly from the control system.
Canbio is compared to a full digital entry level hydraulic cutter of 10 to 430 metric tons.
It features a very compact injection unit with a large capacity and uses a quick bucket change system that directly couples the plastic-added screw bayonet to the screw motor.
The injection device is very rigid due to the use of linear ball bearing guide rails, and the guide is good.
Canbio VSE fully digital energy saving hydraulic machine from 110to 430 tons.
A very compact injection device with a high injection capacity and using a bayonetcoupling quick change barrel system directly connected to the plasticized screw of the hydraulic motor.
Thanks to the use of two linear prism rails with circular linear sliding bearings, the injection device is very rigid and has a good guide.
The injection and screw rotation speed is increased by 20% compared to the standard hydraulic machine.
Vector series for full digital standard hybrids from 650 to 1,500 metric tons.
The clamping device has been completely re-installed
Designed according to the latest computing standards, the unit is more robust and reliable.
The machine is also considered a large distance between iron bars, increasing the travel of moving templates and objects, and making it easier to contact the mold and its functions.
Other particularly interesting elements of this new solution are the injection device, which is equipped with a quick replacement system for screws and cylinders and a plasticization device for handling different types of materials.
The Janus series of all-digital advanced hybrids from 75 tons to 800 tons.
The hybrid solution allows the most suitable electric or hydraulic actuator to be used for a specific mechanism for the most efficient machine and the highest energy saving effect.
For example, the Janus series uses an electric drive to operate the mobile template and rotate the plasticization screws;
Hydraulic actuator for injection stage.
All Vista lines
Motor from 75 tons to 430 tons.
Newdesign has new control software associated with new drive solutions, including a new injection device that provides smooth and smooth operation using a new innovative belt drive system.
A new optical fiber PC digital control system is combined with advanced algorithm computing control system, which makes the movement of the shaft particularly accurate.
Canbimat multi-material machine with solutions for up to 6 injection units from 75 tons to 7,000 tons.
The option to add an injection unit to the press in a vertical, horizontal, parallel or overlapping position provides full freedom of choice for the mold to be used. Bi-
Power range of 2-
From 1,200 to 7,000 bench machines.
The printing machine is equipped with an integrated, modular, variable system
The conveyor pump and the inverter with screw rotation vector control provide the best overlap performance in three basic movements (
Screw rotation, mold movement and top-out or core movement).
Maintain complete motion performance even during continuous motion (
Shorten the cycle time and improve energy efficiency).
Sintesi vertical fixture Machine full digital hydraulic vertical machine from 100 tons to 200 tons.
The clamping unit is vertical while the injection unit can be vertical (PVV)or horizontal(PVH).
The mobile platform plate is driven by 4 tie rods placed in such a way that it is easy to use a 2, 3 or 4 station turntable.
The machine equipped with a horizontal injection device has a simple mechanical system that can adjust the nozzle height to the mold injection point.
Chi Te Machinery Co. , Ltd.
Series: collaborative fixture type: horizontal, hydraulic toggle fixture-
Size range: 66 ~ Injection device of 880 tons: Hydraulic, reciprocating screw injection capacity: 54.
5 to 85 Oz application: thin
Wall, precision parts (
For packaging, automotive, electronic products)
Standard features: Accumulator-
Auxiliary hydraulic, five-
Multi-point switching, multi-processor control.
Option: 2C model designed for multi-component molding. Series: PET-
Type of wire clip: horizontal, hydraulic toggle clip-
Size range: 385-660 tons injection device: hydraulic and electric, double-
Stage injection capacity: 118 to 232 Oz application: PET pre-forming, standard function of 32 to 192 cavity: Electric-Driven Plasmation (two side-by-sideextruders)
Hydraulic piston injection on top
Pentium PC installation cooling station-
Based on control, 15-in.
Graphics track graphics CRT
Process visualization. Series: e-
Type of spray clamp: horizontal, electric toggle clamp size: 55 tons injection device: electric, reciprocating screw injection capacity: 48.
3 cc application: CD (CD, DVD)
Standard features: Pentium PC-
Based on control, 15-in. CRT.
Series: El ion clamp type: electric, toggle clamp size: 55 to 192.
5 tons of injection device: horizontal, electric and reciprocating screw injection capacity: 0. 7 to 20.
4 oz application: Universal-
Standard features: Standard injection speed 250mm/second.
Novelcompact, Cam
Design like a toggle
Patented lubrication system for clamping.
Option: Injection speed of 450mm/second.
New Pacific Machinery Co. , Ltd. J. K. WONG, INC.
Dispenser for multiple lines of injection molding machine with vertical fixture or horizontal fixture.
Expert in plug-in molding and over-molding.
As a complete turnkey system, machinery, automation and molds can be provided.
A large inventory of maintained parts.
Xinxie Machine Technology Co. , Ltd. LTD.
Series: large MD clamp type: horizontal, electric toggle clamp-
Size range: 385-2000 tons injection device: electric, reciprocating screw injection capacity: 17-360 Oz application range: Universal-
Standard features for use and precision molding: multiple servo motors and screws drive injection and clamping.
Injection speed of 300mm/second.
Series: small MD clamp type: horizontal, electric toggle clamp-
Size range: 35 ~ Injection device of 385 tons: electric, reciprocating screw injection capacity: 0.
Application from 7 to 21 ounces: standard function for precision molding: graphic description of injection process, 5-
Point toggle, SPC monitoring, printer port, expert function automatically sets the machine according to the data of the mold, parts and materials.
Injection speed of 300mm/second.
Series: NN clamp type: horizontal hydraulic toggle clamp-
Size range: 35-500 tons injection device: Hydraulic, reciprocating screw injection capacity: 0. 7 to 66.
2 oz application: General standard function: Five-point double-
Optical encoder for clamp, popup and injection, Blur-
Logic temperature control, spcmonitor, automatic clearing function.
Nissin USA Ltd.
Series: AU3E clamp type: horizontal electric, tractor clamp size: 3.
2 tons of injection device: electric, two-
Stage injection capacity: 0. 1 oz (3 cc)
Standard function: AC servo motor for all motion, double-
Tiebarclamp, built in
Installed in the cooler/mold temperature controller on the trolley.
Series: HM7 Denkey clamp type: electric, direct clamp (no toggle)Clamp size: 7.
5 tons of injection device: electric, reciprocating screw injection capacity: 0.
3 oz application: standard function for tiny parts: servo motor built in all Morson
In the cooler and mold
Caster temperature controllermounted.
Series: Elject NEXClamp type: horizontal, electric toggle clip-
Size range: 22 to 397 tons injection device: electric, reciprocating screw injection capacity: 0. 4 to 31.
2 oz applications: standard features for precision molding: the compact modular design allows for different injection units and lower bed layer heights.
There are 0 new controllers. 1-
A fast-responding nis scan rime.
Series: Clamp type: hydraulic Clamp-
Size Range: up to 87 disadvantages injection device: Hydraulic, double
Stage input capacity: ro 17 cc with a rate of up to 2000/sec application: thin-wall, high-
Standard function for speed filling: off-
Digital service loop
Valve control, three screw.
Series: DC clamp type: horizontal, full hydraulic or electric toggle clamp-
Size range: 40 to 400 tons injection unit: two parallel hydraulic reciprocating screwscolor/two-Material forming.
Standard function: double clamping cylinder, NC9300T control;
Two pop-ups run independently of the cycle-time savings. Series: TH-E, TH-RE, TD-E, TD-
RE clamp type: electric, vertical traction (^lamp-
Size range: 20 ~ Injection device of 155 tons: injection capacity of electric, vertical or horizontal reciprocating screw: 0.
Standard features: Rotary injection device; application of 4 to 12 ounces: Insert molding; four-tiebar clamp; two-
Station turntable driven by R-Type AC servo motor
NC9300T control.
Series: TH clamp type: vertical, full hydraulic clamp-
Size range: 33 ~ Injection device of 165 tons: Hydraulic, vertical reciprocating screw injection capacity: 0. 4 to 5.
3 oz application: standard function for Insert molding: to save space, clamp the cylinder inside the machine tool.
Series: TD clamp type: vertical, full hydraulic clamp-
Size range: 110 to 220 tons injection device: Hydraulic, vertical or horizontal reciprocating screw injection capacity: 5 to 21.
6 oz application: insert mold standard function: fixed or rotary table clamping device, flap cylinder at the top of the machine tool to leave space for automatic auxiliary equipment.
Series: PN clamp type: horizontal, full hydraulic clamp-
Size range: 22 tons to 66 tons injection device: Hydraulic, reciprocating screw injection capacity: 0. 4 to 3.
6 oz application: standard features for electronics and other small precision parts: digital settings for mold operation functions
Line injection mechanism, swivcling injection device, variable-
Volume Pump, NC9300T with 10 control. 4-in.
Color LCD for 30 moldsups,floppy-disk drive.
Option: hot sleeve and rubber version.
Series: NS clamp type: horizontal, full hydraulic clamp-
Size range: injection device from 11 tons to 66 tons: Hydraulic, reciprocating screw injection capacity: 0. 2 to 3.
6 o/application: General standard function: competitive price, 4. 5-in.
LCD touch screen (6-in. Screen optional), three-
Part disassembly method.
Series: FN clamp type: horizontal, full hydraulic clamp-
Size range: 89 to 504 tons injection device: Hydraulic, reciprocating screw injection capacity: 3. 4 to 82.
9 ounces of application:
Size operation of cars, electrical appliances, optical parts, etc.
Standard function: NC9300Tcontroller.
Option: hot sleeve and rubber version.
Series: FV clamp type: horizontal, full hydraulic clamp-
Size range: 6 18 to 1440 ton injection unit: Hydraulic, reciprocating screw injection capability: 71 to 297 Oz application: standard function for large parts: NC9300T controller, variable-volume pumps.
Series: CD, MO clamp type: horizontal, electric or full hydraulic clamp size: 33 & 44 tons injection unit: injection capacity of electric or hydraulic reciprocating screw: 27 cc application: cd dvd standard function: injection-
Digital hydraulic servo valve has compression capacity.
Series: type I clamp type: horizontal, hydraulic clamp-
Size range: injection capacity from 197 to 946 tons: 21.
4 to 251 Oz app: Fast-
Standard features: direct-
Pressure clamping with special hydraulic circuit, quick response.
A fast loop of overlapping functions.
There are 10 NC9300T controllers. 4 in.
TFT color display with six
Injection speed in three stages
Stage injection pressure and three-
Stage cabin.
Sumitomo plastics-
Mechanical series: SE7M clamp type: horizontal, electric double toggle clamp-size range: 7.
7 tons of injection device: electric, reciprocating screw injection capacity: 0.
2 ounces for 1086 copper.
A. in application: M. standard function of micro-plastic molding: no ring, directly driven plastic, injection, clamping and pop-up
Drive AC servo motor. N-
Series control with 104-in. touch-
Panel color LCD and complete SPC and QC functions. Series: SE-
DU clamp type: horizontal, electric double toggle clamp-
Size range: 20 ~ Injection device of 198 tons: electric, reciprocating screw injection capacity: 0. 2 to 10.
7 ounces for 2154 copper.
/Minute application: high
Standard features of precision parts of type Ail: Abdominal-free, directly driven plastic-adding, injection clamping, and injection
Drive AC servo motor. Special auto-
The Lubessystem protects ballscrews and provides a cleaner molding environment. N-
9 control 12 in.
The touch screen and USB port can be downloaded. Series: SE-
HD clamp type: Level, electric double toggle Clafnp-
Size range: 242 ~ Injection device of 496 tons: electric, reciprocating screw injection capacity: 11. 2 to 42.
4 ounces for 2316 copper.
/Min application: thick parts and parts standard function with cycle time exceeding 15 seconds: suitable for high
Required duty application-
Keep the pressure at 31,718 psi that matches the injection pressure.
Provides cycle full power up to 40%. N-
Eight controls with 12 in.
200 touch screen and memory for mold settings. Series: SE-
HS clamp type: horizontal, electric double toggle clamp-
Size range: 242 ~ Injection device of 385 tons: electric, reciprocating screw injection capacity: 11. 2 to 33.
4 ounces for 4350 copper.
/Minute application: highspeed, high-
Precision Application standard function with cycle less than 15 seconds: by direct-
AC servo motor drive and belt. Special auto-
The lubrication system protects ballscrews and provides a clean molding environment. N-
Eight controls with 12 in.
Touch screen and internal memory for 200 mold settings. Series: SED-
CI clamp type: horizontal, electric doubletoggle Clamp-
Size range: 83 tons to 220 tons injection device: dual unit, electric direct-
Driving, reciprocating screw injection capacity: 1. 9 to10.
7 ounces for 2154 copper.
/Minute application: high
Double precision
Standard features for shooting parts in two different resin or resin colors: Abdominal-free, directly driven plastic-increasing, injection, clamping, and injection
Drive AC servo motor. Special auto-
The Lubessystem protects ballscrews and provides a cleaner molding environment. N-
Eight controls with 12 in.
Touch screen and memory for 200 mold settings. Series: SE-
HY clamp type: horizontal, electric doubletoggle Clamp-
Size range: 253 to 495 tons injection device: electric, accumulator-
Auxiliary hydraulic injection capacity: 18.
Between 8 and 62 ounces, the interest rate is as high as 245. 4 cu.
In/sec application: packaging and other superhigh-speed,high-
Productivity Application standard features: plastic gain, clamping and pop-up driven directly by no ring
Drive AC servo motor (on 495-
Belt of ton model motor).
The digital servo valve and the measuring feedback device are two accumulators that provide fast response and accurate injection control. Special auto-
The lubrication system protects ballscrews and provides a cleaner molding environment. N-
Eight controls and 12-in.
200 touch screen and memory for mold settings.
Series: SV clamp type: vertical, electric doubletoggle Clamp-
Size range: 20 ~ 55 tons injection device: electric, reciprocating screw injection capacity: 0. 2 to 1.
5 ounces for $538.
/Minute application: high
Precision Vertical standard functions including rings and lenses: plastic, injection, clamping and injection drive
Drive AC servo motor. Special auto-
The lubricant system protects ballscrews and provides a cleaner molding environment. N-
VIIIcontrol and month-in.
200 touch screen and memory for mold settings.
Series: SR clamp type: vertical, rotary table, electric doubletoggle Clamp-
Size range: 55 tons to 83 tons injection device: electric, reciprocating screw injection capacity: 0.
8 to 3 ounces for 883 copper.
/Minute application: high
Precision Vertical standard features including insert and composite applications: No plastic, injection, clamping, top out and turntable drive
Drive AC servo motor.
Electric gear-
The drive table rotates ISO0 in less thani.
6 seconds, and the mechanical stop mechanism with repeatable positioning. Special auto-
The lubrication system protects ballscrews and provides a clean molding environment. N-
VIII control with 12-in.
Touch screen and internal memory for 200 mold settings.
Series: Intelligence (
Demage plastic Group)
Clamp type: horizontal, electric toggle clamp-
Size range: 50 to 220 tons injection device: electric, reciprocating screw injection capacity: 1. 1 to 40.
3 ounces at a rate of 27. 9 cu in.
Standard function: AC servo drive, directly drive ballscrews operation fixture, injection, plastic enhancement, injection. Three-
The way parts are removed;
12-Pathfinder controlin. touchscreen;
The controller can recognize the barrel size and calibrate the control screen. Series: El-Exis S (
Demage plastic Group)
Clamp type: horizontal hydraulic toggle clamp-
Size range: 66-600 ton injection device: Hydraulic, reciprocating screw with accumulator, electric screw drive application: highspeed, thin-
Standard features of wall packaging: NC4 control.
AC servo motor driver
Including static hydraulic (hydraulic)
The driver of the Toggle clip.
The central hydraulic system with accumulator provides power for injection, core pull, nozzle touch.
Series: system (
Demage plastic Group)
Clamp type: horizontal hydraulic toggle clamp-size range: 27.
Injection Device from 5 to 462 tons: Hydraulic, reciprocating screw application: universal standard function: modular design, accumulator-
Auxiliary injection through the servo valve allows the screw and fixture to move at the same time. Series: Extra (
Demage plastic Group)
Clamp type: horizontal, full hydraulic, toggle clamp-
Size range: 28 to 220 tons injection device: horizontal, reciprocating screw (
Pump and proportional valve electronically controlled)
Application: small parts in general-
Standard features for use: nc4 control, electronic control DFE pump and proportional valve for injection.
Toshiba Machinery Co. , Ltd.
American series;
EC, ECNII clamp type: electric, 5-
Double toggle clip-
Size range: injection device from 5 to 950 tons: electric, reciprocating screw injection capacity: 0.
5 to 184 ounces for 96 ounces.
Standard features: V30 12/sec application: critical parts for medical and tight tolerances. 1 in. active-
Matrix controller; FIT(
Fill pulse transfer), laminar-Traffic, circle, QDC (
Fast deceleration circuit);
Mold memory 300;
USB and CF expansion slots.
Option: wide board from 310 to 6 10 tons; high-
Injection speed (550 mm/sec); LSM; multi-
Forming Materials with rotating templates; parting-line injection; thermoset.
Series: ISGSClamp type: horizontal, full hydraulic fixture-
Size range: 308 ~ 610 tons of injection device: Hydraulic, reciprocating screw injection capacity: 12.
9 to 126 ounces for 47 ounces.
Standard features: V21active-scope of application: small/medium size parts
Matrix controller and molyzer part-
Quality Analyzer;
Wideplatens, larger daylight openings, longer fixtures and top rods;
Optical encoder for injection and clamping position accuracy of 0. 001 mm;
Hydraulic blocking circuit to keep clamping tonnage while saving energy; 3-
Oil filtration of micron grade; chrome-plated tierods; ejecton-the-fly. Options: High-
Speed injection using accumulator or additional pump package; two-
Material machinery with rotating table plate; parting-line injection;
Hot sleeve configuration.
Series: ISGTClamp type: horizontal, Hydraulic Mechanical doubleplaten Clamp-
Size range: 720 to 1150 tons injection device: Hydraulic, reciprocating screw injection capacity: 104 to 250 ounces, the price is 77 copper.
/Sec application: Medium-to large-
Standard features for size parts: V21active-
Matrix controller and molyzer part-
Quality Analyzer;
Wideplatens, larger daylight openings, longer fixtures and top rods;
Optical encoder for injection and clamping position accuracy of 0. 001 mm;
Binary pump configuration for energy efficiency; 3-
Oil filtration of micron grade; chrome-plated tierods; eject on-the-fly. Options: High-
Speed injection using accumulator or additional pump assembly;
Extend daylight; 2-
Material Machinery;
Electric screwdriver.
Series: ED clamp type: horizontal, mixed, doubleplaten Clamp-
Size range: 950 tons, 1450 tons, 1950 tons and 3850 tons
Electric, reciprocating screw injection capacity: 103 to 350 oz application: standard function for large parts: V30 12. 1 in. active-
FIT (matrix controller)
Filling pulse transfer), laminar-Traffic, circle, QDC (
Fast deceleration circuit); 30 mold memory;
USB and CF expansion slots. Series: ISF-D, ISG-
D. type of clamp: horizontal, two-in-one hydraulic machinery
Injection device for platform plate: Hydraulic and reciprocating spiral fixture-
Size range: injection capacity of 1450 to 3850 tons: 142 to 726 ounces, injection rate of 104 copper.
Standard features: V21 active-scope of application: Large parts
Matrix controller;
Optical encoder for injection and clamping accuracy of 0. 001 mm;
Binary pump configuration for energy efficiency; 3-
Oil filtration of micron grade; chrome-plated tierods; ejecton-the-fly.
Choice: electric servo injection device; high-
Speed injection using accumulator or additional pump assembly; wide platens;
Extend daylight.
Yubu Machinery Co. , Ltd.
Series: Ubemax Clamp type: horizontal, hydraulic toggle Clamp-
Size range: 1000 to 2500 ton injection unit: Hydraulic, reciprocating screw injection capability: 92 to 48 I oz application: universal standard features: Humma-
Xtouchscreen S controller (Windows PC-based), Allen-
Bradley PLC, warehouse for mold 99-
Long template ups
Support shoes for guiding oversized molds, double metal screws/barrels.
Series: Ultima UN clamp type: horizontal, electric toggle clamp-
Size range: 720-3300 tons injection device: electric, reciprocating screw injection capacity: 92-401 ounces
Standard function for wall and precision molding: viaAC servo motor works independently. Constant-
Pressure filling (CPF)control system.
Color LCD display with touch screen; fuzzy-
Logic temperature control, pressure plate guide roller.
Injection Device: Hydraulic, reciprocating screw injection capacity: 31. 9 to 246.
6 oz application: General standard function: Touch-
Storage panel controller for 20 mold groups-ups,self-diagnostics.
Options: wide board, debar puller, quick mold change for models 720 tons and above.
Series: Ubemax ST clamp type: horizontal hydraulic toggle clamp-
Size range: 1450 ~ Injection device of 7000 tons: Hydraulic, reciprocating screw injection capacity: 152. 9 to 993.
7 oz application: standard function for large parts: automatic fixture-
Automatic color-force compensationChange Order.
Option: quick mold change, automatic heat-
Automatic mold-runner coupling
Practical coupling.
Series: Ubemax UU clamp type: horizontal, Hydraulic Mechanical double-platen Clamp-
Size range: 2200 to 4400 tons injection device: Hydraulic, reciprocating screw injection capacity: 265 to 707 ounces of application; Thin-
Wall, precision molding;
Standard features of large and thick parts: diagonal arrangement of two molds moving cylinders horizontally; HUMMA-
S controller with touch screen and EL display
Diagnosis and storage of 20 molds-
Automatic color-ups
Change Order, shuttle-
Fast mold change, automatic heat-
Automatic mold-runner coupling
With coupling, the standard batch counter stops the machine after the preset number of cycles.
Weixing Machinery International Co. , Ltd.
Hydra series (HQ)
Clamp type: horizontal, full hydraulic doubleplaten Clamp-
Size range: 33 ~ Injection device of 275 tons: Hydraulic, reciprocating screw injection capacity: 1. 2 to 23.
Standard function: Barber
Coiman MACO 4000 for cleaning controlroom molding.
Option: electric screw drive.
Series: MP clamp type: horizontal, hydraulic toggle clamp-
Size range: injection device from 55 to 935 tons: Hydraulic, reciprocating screw injection capacity: 1. 7 to 160.
3 oz application: General standard function: Barbcr-
Colman MACO 4000 controller for cleaning-room molding.
Option: electric screw drive.
L standard function for use: touch screen controller, store 20 mold settings, self-diagnosis. Options: wide board, debar puller, quick mold change for models 720 tons and above. Series: Ubemax ST clamp type: horizontal hydraulic toggle clamp-size range: 1450 to 7000 tons injection device: Hydraulic, reciprocating screw injection capacity: 152. 9 to 993. 7 Oz application: standard function for large parts: automatic clamping force compensation, automatic color change order. Options: quick mold change, automatic hot runner coupling, automatic mold common coupling. Series: Ubemax UU clamp type: horizontal, Hydraulic Mechanical double plate clamp-size range: 2200 to 4400 tons injection device: Hydraulic, reciprocating screw injection capacity: 265 to 707 ounces thin wall, precision molding; large, thick parts standard features: diagonal arrangement of two mold flow guide cylinders; HUMMA-S controller with touch screen and EL display, self-diagnosis, storage of 20 mold settings, automatic color changing order, shuttle Quick mold change, automatic hot runner coupling, automatic mold utility coupling, standard batch counter stop machine after preset cycle times. Weixing Machinery International Co. , Ltd. series, \'Hydra four (HQ) clamp type: horizontal, full hydraulic two clamps-size range: 33 to 275 tons injection device: Hydraulic, reciprocating screw injection capacity: standard features from 1. 2 to 23. 6 ounces: Barber-Coiman MACO 4000 controller for clean room molding. Option: electric screw drive. Series: MP clamp type: horizontal hydraulic toggle clamp-size range: 55 to 935 tons injection device: Hydraulic, reciprocating screw injection capacity: 1. 7 to 160. 3 Oz application: universal standard function: the barbcr-Colman MACO 4000 controller is suitable for forming in clean room. Option: electric screw drive.